PASSPORT0 pages

Passport®
www.maviflex.com
MAVIFLEX S.A. au capital de 1 590 000 € - TVA U.E. FR 50 328 025 721 03/2002 We reserve the right to change or modify details of the products shown in this laeflet without notice Creation VITOSHA 33 4 78 54 65 08.
1 - door clear opening width
2 - Height of doorway to underside of lintel
or beam and ground floor.
a) Fixing directly beneath lintel or beam
= door clear opening height. Method
R2 "Lintel Mount" or Method S, 80 or
100 mm "RSJ mount"
b) Fixing directly behind the lintel for
maximum clearance = door clear opening
height - But advise method R1
"flat mount"
c) Sliding door behind lintel with track to
move door sideways method T
"Monorail Mount" - Single or double
runs of track are available.
Consult The Maviflex Representative
3 - Overlap needed
standard or full overlap or any overlap in
50 mm steps to suit conditions
4 - Mounting method
R1 - Wall face fixed
R2-Under lintel fixed
S- Under Steel RSJ fixed
T-Sliding track fixed
5 - Fixing location
- Beneath lintel or beam mount
- Behind the lintel or wall mount
Note on width arrangement
- Door beneath lintel or door to universal
beam or channel
Door width = door clear opening width
(between jambs of the walls)
- Door behind the lintel - face fixed or sliding
door with track face fixed.
Door width:add to the clear opening
width + 300 mm, to overlap the jambs of
the wall (150 mm each side)
Fixed Passport' strip door arrangement
(Fixture method "R" or "S")
6 examples of strip and overlap configurations R = Strip overlap in mm
Note : overlap may varied in 50 mm steps to suit conditions
IMPORTANT : Door clear opening height
and exposure of doorway determine
- the model of strip
- The overlap
Clear opening height up to 2.50 m - strip
model L200 (200 x 2)
Clear opening height from 2.50 m up to
3.50 m - strip model F300 (300 x 3)
Clear opening height from 3.50 m up to
6.50 m - strip model S400 (400 x 4)
Select : Standard overlap for internal
opening draft (normal conditions)
pedestrian passage- partitioning curtain.
Select full overlap for External opening -
wind pressure-good draft-dustnoise
barrier
Ref. L200 R50
Ref. F300 R100
Ref. S400 R100
Ref. L200 R100
Ref. F300 R150
Ref. S400 R200
R2
S
R1
T
Call your Maviflex distributor for systems
recommandations and pricing information
PASSPORT’ How to select
Door location is important to specify strip model to be chosen
Doors used in external openings exposed to wind will need maximum overlap to prevent
draught penetration
The height of the door determines accordingly the width and the thickness of the strip
model to choose
On the other hand, door where there is heavy traffic flow, or where high loads must pass,
might require a smaller overlap for easier passage.
The Passport'system overlap may be varied in 50 mm steps to suit conditions
The Passport' strip door is made to measure and delivered with the fixture method
specified
Passport’ how to order
When ordering a Passport' PVC strip door the following information is required