Sine-Tables0 pages

BM64.000 Series Sine Tables
for grinding operations single swivelling on the longitudinal axis
These types of sine tables can also be supplied with a
fine pole distribution chuck. The pole spacing is 6 mm in
steel, 1.5 mm in brass, 2 mm in steel and 1.5 mm in
brass. Machining the top plate is possible to a depth of
20 mm in the steel 6 mm pole distribution types, the
others to a depth of 6 mm. Two end plates are supplied
as standard.
Sine tables make it possible to perform grinding
operations to a high degree of accuracy on pieces of
work with non-parallel surfaces. The angles can be set
with end guides. The end guides can be set up to angles
of 45° and the table can be rotated through 90°. The
mounting for the end guides is 2 mm under the datum
line which means it is possible to set very fine angles.
Setting the angles can be done to an accuracy of 10
seconds (1/360°). A sine table is supplied with a chuck.
To prevent movement occurring during the grinding
process, the table can be locked on the shaft.
The standard sine tables are supplied with a chuck with
one switching zone and a normal pole spacing of 6 mm
in steel and 5 mm in brass. Machining of the top plate
is possible to a depth of 20 mm in steel and 6 mm in
brass. These types are equipped with a detachable
handle with an allen key head except for BM 64.005
to BM 64.009 inclusive and BM 64.105 to BM 64.109
inclusive.
normal pole
Art.no.
BM
BM
BM
BM
BM
BM
BM
BM
BM
BM
64.000
64.001
64.002
64.003
64.004
64.005
64.006
64.007
64.008
64.009
fine pole
Art.no.
BM
BM
BM
BM
BM
BM
BM
BM
BM
BM
64.100
64.101
64.102
64.103
64.104
64.105
64.106
64.107
64.108
64.109
A
B
C
D
E
F
H
J
150
255
150
250
300
350
400
450
400
500
100
130
150
150
150
150
150
150
200
200
118
125
133
133
133
139
139
139
151
151
238
345
240
340
395
445
492
550
520
620
122
152
165
165
165
165
165
165
220
220
70
100
100
100
100
100
100
100
150
150
23
23
23
23
23
23
23
23
23
23
15
15
15
15
15
15
15
15
15
15
weight(kg)
net gross
12
14
25
28
19
22
30
34
36
40
40
45
44
50
50
55
67
76
87
96
All measurements in mm. Other sizes and versions swiveling on the transverse axis on request.
www.wenmag.com
P.O. Box 97456 / Raleigh, North Carolina 27624, USA
(919) 954-1004 / Fax (919) 954-1009