VacuEasylift bale lifter0 pages
Vacu Easy I ift
nnnn"AWI.com
nnnnRubber bale vacuum lifter
nnnnVacuEasylift uses vacuum for both lifting and holding loads in
nnnnplace.The vacuum is created by using a vacuum pump, which
nnnncan be as far away as 30 metres from the actual lifting point.
nnnnThe air is channelled through a filter and air hose from a lifting
nnnntube fitted with a suction foot.
nnnnThe lifting tube is suspended on a swivel and can be operated
nnnnin 360 degrees. The vacuum inside the lifting tube is
nnnnregulated with a control handle. When the partial vacuum
nnnnrises the lifting tube retracts and lifts the load. When the
nnnnpartial vacuum decreases the tube stretches and lowers the
nnnnload.
nnnnVacuEasylift is a thoroughly proven system meeting the
nnnnhighest standards of functionality and safety. The suction foot
nnnnholds the load securely in place until it has reached the floor.
nnnnPower cuts do not cause any safety issues. In the event of a
nnnnblackout, a safety valve shuts down and the load is lowered to
nnnnthe floor gently and under complete control.
nnnnAn investment in a VacuEasylift vacuum lifter pays for itself.
nnnnThe system is easy to install and adjust to suit the
nnnnrequirements of most loads. The specific rubber bale may
nnnnneed to be tested for safe lifting characteristics. Please contact
nnnnTAWI or your VacuEasylift dealer for more info!
nnnnProject nr: 3248, rubber bale lifter
nnnnClient: Tire industry, pharmaceutical industry
nnnnVM160/180 lifting rubber bales for tyre/rubber
nnnnindustry. These bales are lifted into a mixer unit
nnnnfor further processing into tires.
nnnnLifting rubber bales is one of the oldest and most
nnnnpopular applications for the VacuEasylift.
nnnnTAWI has recently redesigned the suction foot used for
nnnnthis specific purpose, now more effective than ever.
nnnnWe have several references for this type of lifting.
nnnnVACUUMLIFTER VacuEasylift model VM160-VM180 with suction foot
nnnnfor rubber bales appr 60 kg:
nnnnHandle
nnnnLift tube
nnnnSwivelling function
nnnnLifting speed
nnnnLifting height
nnnnCapacity Model
nnnnmax <60 kg
nnnnCapacity
nnnnmax 80 kg
nnnnVM160
nnnnModel
nnnnVM180
nnnnFixed handle
nnnn0160-180 mm
nnnnIntegrated top swivel
nnnnAppr 1 m/s
nnnn1700 mm
nnnnArt nr 616200
nnnnArt nr 618200
nnnnVACUUM PUMP SA350/2 art nr 610963 (3-phase, 50 Hz)
nnnnEffect 3,0 kW
nnnnACCESSORIES
nnnn• Special rubber bale lifter, suction foot art nr 3248
nnnn• Air tube 052 mm 1:10 m art nr 610905
nnnn• Air filter art nr 610931
nnnn• Silencing hood for vacuum pump (optional) art nr 666600
nnnn(Suspending jib arm or crane system not included)
nnnnTAWI AB
nnnnBox 10205 434 23 KUNGSBACKA SWEDEN
nnnnTel +46 (0)300 18500
nnnninfo@tawi.se •www.TAWI.com
nnnnTAWI
"