SU112-TOUCH0 pages

"

motion control technologies

nnnn

an	[ecD
motion control technologies

nnnn

SU112-TOUCH

nnnn

MultiAxis Controller with included PLC, up to 5 Axis, 48 digital in, 48 digital out,

nnnn

LCD color with touch screen feature and 40 keys membrane keyboard

nnnn

SU112-TOUCH is the low cost Axis Controller with included

nnnn

PLC made by Arteco Motion Tech.

nnnn

Minimum configuration: 2 interpolated axis with included

nnnn

sensors, 16 in, 16 out, 2 analog input and 1 serial port

nnnn

RS232/485.

nnnn

Thanks to the slots located in the back side of the multiaxis

nnnn

controller, SU112-TOUCH can be configurated depending on the

nnnn

user's needs. There are 4 slots available. Each slot can receive

nnnn

the available expansions boards as the 8 digital input + 8 digital

nnnn

output, the 1 axis expansion, 2 axis expansion, the 8 digital

nnnn

input + 8 digital output + canbus port.

nnnn

So, the maximum configuration can reach 5 interpolated axis

nnnn

with included sensors, 32 in, 32 out, 2 analog input, 2 serial

nnnn

ports RS232/485, 1 CANbus port to connect the controller to

nnnn

other Axis and I/O expansion modules for distributed I/O and

nnnn

Axis.

nnnn

Each state of the I/O is shown by LEDs located near each

nnnn

terminal block.

nnnn

SU112-TOUCH provides the color LCD 5,7" display 320x240

nnnn

pixels and a resistive touch screen. The display, the touch

nnnn

screen and the keyboard can be programmed using the

nnnn

implemented functions and instructions of the PLC.

nnnn

A rich set of graphics and text commands allows the user to

nnnn

make his HMI, 100% according to his needs.

nnnn

SU112-TOUCH can be controlled using a rich set of Motion

nnnn

Control Functions: Simple positioning, Linear interpolation,

nnnn

Electronic cam, Boolean cam, Optimized trajectories generating

nnnn

starting from a points series, Rotative Axis, Control of Pick and

nnnn

Place machines, Circular interpolation, Self-learning and its

nnnn

execution.

nnnn

Other important features: remote programming like debug,

nnnn

service and upgrade using the low cost WEB interface, built in

nnnn

modbus RTU protocol for connecting the Axis controller to

nnnn

SCADA and other common HMIs.

nnnn

	m	\ \ \ \ ITKY \
/ / / / 1 1

"