/ Battery Charging Systems / Welding Technology / Solar Electronics

Variostar 1500/2500/3100
/ MIG/MAG welding system

/ The step-switched MIG/MAG welding system VarioStar is a byword for rugged design and ease of operation.
Particularly when used on light-gauge sheets, VarioStar stands out for its exceptionally good welding properties. Three
different amperage ratings are available: 150, 250 and 310 A, optimally harmonised for both mixed gas and CO2. The
VarioStar machines are just about indestructible, being robustly built from only top-grade materials.

Operability

Welding properties

/tThe VarioStar is extremely simple to operate. Only
three settings need to be made:
/ switching-steps
/ inductance tap
/ wirefeed speed

/tVarioStar has two or three inductance taps. This makes
it easier to adapt the arc to the job needing to be done.

/tAn integral settings assistant makes the machine even
easier to operate.

/ The integral settings assistant makes the
machine extremely easy to operate.

/tThe ignition process is reliable and absolutely jerk-free:
at the start of welding, the wire is fed more slowly and
only gets up to speed once the arc has ignited.
/tThe end-of-welding sequence is easy to define, with an
adjustable wire burn-back.

/ 2-roller drive ensures excellent wirefeeding.

/ The specially tuned inductance makes it
possible: optimum welding with CO2 and
mixed gas.