TTR-04.1 tripod turnstile0 pages

ENTRANCE AND ACCESS CONTROL PRODUCTS

TTD-03.1
Electromechanical Box Tripod Turnstile
for indoor application

Technical Specification

Application:

The TTD-03.1 turnstile is designed to maintain access control to industrial and
office facilities, banks, shops, transport terminals, etc.
High throughput capacity allows its use for heavy pedestrian traffic.

Function:

The turnstile features six operating modes set from the remote control panel
and is intended for bi-directional single or multiple passages. Passage can be
controlled in either direction.

Design:

The TTD-03.1 consists of a turnstile housing with a built in control logic board
(CLB), a top cover with LED directional indicators, a remote control panel and
a set of barrier arms.
The turnstile housing is constructed as a sheet metal framework on a frame base
with two outer panels.
The top part of the housing contains a rotation mechanism with three barrier
arms fixed into a hub and a damper, a self-centering mechanism, a control
mechanism with optical arm rotation sensors and a locking device, a mechanical
release lock.
The top cover is made radio transparent to allow concealed mounting of readers
inside the turnstile housing. The operation zone stands out with a different colour;
the read range is up to 80 mm.

Status and Direction
Light Indication:

Two LED directional indicators with bright pictograms are located on the top
cover as standard:
Green Arrow indicates that the turnstile is unlocked to permit a passage and
shows the direction of authorised passage;
Red Cross indicates that passage is not allowed and shows that the turnstile
remains in locked status.

Control over Turnstile:

Control over the turnstile can be carried out in either pulse or potential control
mode. In both modes the control signal is applied to the CLB connector block
contacts.
This alternative ensures correct operation of the TTD-03.1 in any existing access
control system, allowing use of controllers with outputs supporting the potential
control mode.
The turnstile can be operated:
- from the remote control panel or a wireless remote control (in the pulse control
mode);
- from access control system (ACS) via a controller (in either pulse or potential
control mode).

PERCo TTD-03.1 Specification

page 1 of 6