DVS series0 pages
Proportional Pressure-Relief Cartridge Valve, Size 1
Qmax = 1.5 l/min, pmax = 420 bar
Pilot valve, seated design, direct acting
Series DVSA-1L…
S Can be used as a pilot valve
S Compact construction for
cavity type AL – 3/4-16 UNF
S Operated by a proportional solenoid
S In a power failure, the pressure setting drops
to the minimum value
S 5 pressure ranges available
S All external parts zinc plated, chromited (CrVI-free)
S High pressure wet-armature solenoids
S The slip-on coil can be rotated, and it can be
replaced without opening the hydraulic envelope
S Various plug-connector systems and voltages
are available
S Can be fitted in a line-mounting body
1
Description
These proportional pressure-relief cartridges, series
DVSA-1L…, are size 1 pilot valves featuring a seat-valve
design and a 3/4-16 UNF mounting thread. With these pres
sure-relief cartridges, the relief pressure is dependent on
the electrical control signal and can be continuously varied.
When the solenoid is de-energised (initial position), con
nection 2 → 1 is open and the minimum pressure (free flow)
depends on the flow rate. Any pressure at port 1 is additive
to the valve setting at port 2, therefore port 1 should prefera
bly be connected directly to tank. In control mode, the relief
pressure is proportional to the change in the required value
(amplifier output current). In order to obtain precise pres
sure settings over the whole of the required pressure range
2
(optimum resolution), the pressure relief cartridges are
available in five pressure levels. These proportional pres
sure-relief cartridges are primarily used as pilot valves,
mainly in mobile and industrial applications to allow a pres
sure in hydraulic installations to be limited electro-propor
tionally. All external parts of the cartridge are zinc plated
and chromited (CrVI-free) and are thus suitable for use in
the harshest operating environments. The slip-on coils can
be replaced without opening the hydraulic envelope and
can be positioned at any angle through 360°. If you intend
to manufacture your own cavities or are designing a linemounting installation, please refer to the section “Related
data sheets”.
Symbol
1
2
3
Technical data
General characteristics
Description, value, unit
Designation
proportional pressure-relief cartridge valve
Design
pilot valve, seated design, direct acting
Mounting method
screw-in cartridge 3/4-16 UNF
Tightening torque
40 Nm ± 10 %
Size
nominal size 1, cavity type AL
Weight
0.40 kg
Reference: 400-P-580101-E-01
Issue: 01.2012
1/5
"