Boost 60700 pages
Cyberbond
Boost 6070
TECHNICAL DATA SHEET
BOOST 6070 cyanoacrylate adhesive primer strengthens the adhesion of Apollo adhesives to
polyolefins and other low energy plastics. BOOST 6070 also increases the bonding ability of
other difficult substrates such as silicone rubber and polytetrafluoroethylene. BOOST 6070
can be applied to surfaces by wiping, brushing, or spraying and contains no chlorinated or
fluorinated solvents.
Physical Properties - Liquid
Base Compound
Appearance
Viscosity
Specific Gravity
Flash Point
Shelf Life
Boiling Point
Odor
Vapor Density
Heptane
Colorless liquid
1 cps
0.7
25°F
12 months unopened
210°F
Pungent
Not available
Percentage Volatiles
(by weight)
100% @ 70°F
RoHS Compliant?
Yes
General Instructions
N/A
Storage
Specifications and Approvals
10993-5
Note
The data contained herein are furnished for information
only and are believed to be reliable. Cyberbond L.L.C.
cannot assume responsibility for the results obtained by
others over whose method Cyberbond L.L.C. does not
control. It is the user’s responsibility to determine
suitability for the product or of any production methods
mentioned herein and to adopt such precautions as may
be advisable for the protection of property and of
persons against any hazards that may be involved in the
handling and use thereof. In light of the foregoing,
Cyberbond L.L.C. specifically disclaims all warranties of
merchantability or fitness for a particular purpose arising
from sale or use of Cyberbond L.L.C. products.
Cyberbond L.L.C. specifically disclaims any liability for
consequential or incidental damages of any kind,
including loss of profits. The discussion herein of various
processes or compositions is not to be interpreted as
representation that they are free from domination of
patents owned by others or as a license under any
Cyberbond L.L.C. patents which may cover such processes
or compositions. We recommend that each prospective
user test the proposed application to determine its
suitability for the purpose intended prior to
incorporating any product or application in its
manufacturing process using the data as a guide.
BOOST 6070 is highly flammable and should be stored away from
heat, open flame, or ignition sources. Products should be stored
unopened in a cool, dry place out of direct sunlight.
Health Precautions
Skin Contact: Wash exposed areas with copious amounts of soap
and water for 15-20 minutes.
Prior to use: See Material Safety Data Sheet
For safe handling information on this
product,consult the Material Safety Data
Sheet (MSDS)
Cyberbond Europe GmbH
401 N Raddant Road
Werner-von-Siemens Straße 2
Batavia, IL 60510
D - 31515 Wunstorf
630.761.8900 tel
Germany
www.cyberbond1.com
Curing Performance
Cyberbond, LLC
49 / 50 31 / 95 66 - 0 tel
www.cyberbond.de
N/A
Cyberbond LLC.....
630.761.8900.....