عضویت 
ورود اعضا
راهنمای خرید
GLUE SYSTEMS WITH DIAPHRAGM PUMP SERIES CLD0 pages
COLD GLUE APPLICATION SYSTEMS
COLD LINE SERIES
GLUE APPLICATION SYSTEM CLD SERIES WITH 1:1 RATIO DIAPHRAGM PUMP
The glue application system with CLD Series diaphragm pump are indicated for distributing cold low viscosity water-based adhesives (up to
1,500 mPas). All parts that come in contact with the adhesive are in stainless steel or are treated to prevent oxidation. These highly reliable
guns require minimal maintenance and guarantee an efficient solution for dosing adhesives at low pressures. Available in different
configurations, they can be integrated with accessories such as proportional valves, encoders, photocells and glue level control device.
ANTI-PULSATION FILTER
A stainless steel glue filter, included as a standard feature on all models, has the
double function of eliminating glue impurities that could block the nozzles and
decreasing the pulsations created by the pump with a sphere on the bottom of the
filter. An easily extractable cartridge inside the filter facilitates cleaning operations.
DIAPHRAGM PUMP
A diaphragm pump with a 1:1 compression ratio, pneumatic controls and anti-stall
valve is used.
MANUAL OR AUTOMATIC PRESSURE ADJUSTMENT
To control the quantity of glue, in relation to machine speed, a stainless steel
pressure regulator can be mounted with a 1:1 ratio, controlled by a proportional
valve or set manually.
LID
The pump is mounted on a plastic lid which is easily positioned on standard
buckets (capacity of 20-30 lt), and can be transferred to a bucket filled water to
wash the system.
TECHNICAL SPECIFICATIONS
ADHESIVE VISCOSITY
PUMP TYPE AND RATIO
MAXIMUM PUMP RATE
WORKING PRESSURE
MAXIMUM WORKING PRESSURE
1.500 mPas
pneumatic diaphragm ratio 1:1
25 lt/min (depending on used adhesive)
0,5÷6,0 bar
6 bar
GLUE APPLICATION SYSTEM CLP SERIES WITH 4:1 RATIO PISTON PUMP
The glue application system with CLP Series piston pump are indicated for distributing cold medium viscosity water-based adhesives (up to
10,000 mPas). All parts that come in contact with the adhesive are in stainless steel or are treated to prevent oxidation. These highly reliable
guns require minimal maintenance and guarantee an efficient solution for dosing adhesives at high pressures. Available in different
configurations, they can be integrated with accessories such as proportional valves, encoders, photocells and glue level control device.
PISTON PUMP
A piston pump with a 4:1 compression ratio with pneumatic controls is used.
MANUAL OR AUTOMATIC PRESSURE ADJUSTMENT
To control the quantity of glue, in relation to machine speed, a stainless steel
pressure regulator can be mounted with a 4:1 ratio, controlled by a proportional
valve or set manually.
ANTI-PULSATION FILTER
A stainless steel glue filter, included as a standard feature on all models, has the
double function of eliminating glue impurities that could block the nozzles and
decreasing the pulsations created by the pump with a sphere on the bottom of the
filter. An easily extractable cartridge inside the filter facilitates cleaning operations.
LID
The pump is mounted on a plastic lid which is easily positioned on standard
buckets (capacity of 20-30 lt), and can be transferred to a bucket filled water to
wash the system.
TECHNICAL SPECIFICATIONS
ADHESIVE VISCOSITY
PUMP TYPE AND RATIO
MAXIMUM PUMP RATE
WORKING PRESSURE
MAXIMUM WORKING PRESSURE
10.000 mPas
pneumatic piston ratio 4:1
35 lt/h (depending on used adhesive)
0,5÷24,0 bar
6 bar
