Orbital 16 ECO LOGO0 pages
FerroCrtaliC
INTERNATIONAL
kii | w * » • • /_ |
Sandblasting machines are connected to a professional, suitably dimensioned recycling filter system CENTRO,
which enables perfect dedusting of the working space even when using four blast guns, and using any kind of
abrasive.
The CENTRO filter unit has installed a recycling system for fine abrasives, which constantly cleans and returns
used abrasive into the working process.
Thanks to that, our machine has the mark ECO in its name.
The amount of abrasive in the system is very small and it remains nearly constant, only a small quantity has to be
added daily.
For marking and making logos, very fine and hard abrasives are used, which are nearly dust. Therefore special
attention is made to the transport of abrasives to the blast guns.
Thanks to our unique solution of the abrasive collecting pot, the dosage into any blast gun is constant and even and
without interuption, even afterseveral days of non-working.
CENTRO filter units have installed highly capable filter cartridges, specially adapted to the conditions of
sandblasting. Filter cartridges are automatically cleaned by jets of compressed air (FC-Pulse-jet system). The
installed electric control is pre-set for common working conditions. For the user it is easy to change the parameters
as per his needs.
Before making your decision, you are welcome to contact our team of experts for free consulting and we can assure
that with our 40 years of experience you will get the right technology and the best equipment to solve your problem.
FerroCrtaliC
d.o.o.
Sela pri Dolenjskih Toplicah 47, 8350 Dolenjske Toplice, Slovenia - Europe
tel.: +386 (0)7 38 45 100; fax: +386 (0)7 38 45 115
Internet: http://www.ferrocrtalic.com/
E-mail: info@ferrocrtalic.com
18
FerroCrtaliC
INTERNATIONAL
SPECIAL BLASTING MACHINE
ORBITAL 16-ECO LOGO
The sandblasting machine ORBITAL 16 ECO LOGO is specially designed and
manufactured for large series to sandblast logos or to realize marking on the
surface of ceramic or glass cups, vases, kitchenware or bottles.
ORBITAL 16-ECO LOGO
FerroECOBiast
EUROPE
FerroECOB
EUROPE
An operator stands in front of the machine and loads and unloads cups, which are
previously taped or protected in special masks, in which are cut-out the desired logos
or markings. Accordingly to the design and the quality of the mask, the sandblasting
or matting is done only on the outer surface layer, or it can be done with a depth
effect, up to a few millimeters deep.
FerroECOBiast®
EUROPE
"