Display Inclinometer SX428910 pages

Aerospace
Energy
Measurement
Railway

Sensorex®

Display inclinometer model ALPHA 4000
SX42891
Characteristics
 Autonomous unit
 Wide range
 High resolution
 Accuracy : ±0.1% of full
scale
 Rugged housing
 RS232 output
 Conform to European
Standard of Network

The Meggitt (Sensorex) SX42891 inclinometer is a self contained angle measuring unit with
integrated display. With its own internal battery (2 x 1.5V AALR6) and LCD, the angle can be
directly read either in degrees, mrads, and mm/m.
The four sides can be used as a reference allowing measurements to be made on any vertical
or horizontal surface. A hold button maintains the current display. The auto switch off function,
powered by battery, gives autonomy of up to 150 hours. When the battery level is insufficient,
this is displayed on the LCD.
Pushing “menu” button will enable the following functions:
- Temperature display
- Contrast
- Inclinometer calibration
- Auto switch-off selection
A zero-reset function allows the user to use any angle within the measurement range as zero
reference. The display then shows the difference between the actual inclination and this reference.
The inclinometer SX42891 can also be connected to a PC via a RS232 bus (serial output)
available on a Binder connector located on the front panel.

Meggitt Sensing Systems
Our measurement product competencies:
LVDTs | Inertial systems | Inclinometers | Accelerometers | IMU |
MEMS sensors | Servo-inclinometer | Conditioners

Applications
 Metrology
 Machine levelling and setup
 Slope control
 Buil