Pronic - TK Range - In-die Tapping Unit0 pages
Secure
cartridge
«Rapid approach of the tapping head» function actuated either
by pneumatic cyliders, by pull-rods or by a cam
Motorization lubricated by oil
bath, fixed mounted on the
lower shoe
TK range
High performance Tapping solution
Adjustable gear box, integrated in the
quick installation kit
Removable and
lightweight tapping head
The modular tapping solution,
easy to integrate and use
Tapping units with removable
single or multi-tap head and
built-in mobility functions.
Strip support
Built-in drivers on the
tapping head (option)
This made-to-measure turnkey solution is adapted
to your die environment:
Built-in strip following
function (pressure pad)
•t
Strip guiding function integrated
in the tapping head
Lower shoe of the
tapping unit (option)
•t The tapping station design is simplified
and quick to implement.
•t
Secured cartridge:
2 types of motorization:
Mechanical
• Tap held by collet.
• Vertical guidance by key or spline ensures
better control of operating clearances and guarantee better performance.
What's included:
•t Tapping unit either MS or ML version configured
for your project
•t Screws and dowels to fix the unit on your die
•t Tap wrench for quick tap change
•t Handbook manual with parameters for your
project
•t Detailed part list for your tapping unit
•t
• IMotorization lubricated with
oil bath.
Servo-driven
• Independent from press stroke.
• Different motor powers available.
Simple integration of the device in the die.
•t
• Increased reliability.
Pictures and texts are non contractuals
• Waterproofness
reinforced.
•t
Use is simplified: No specific tooling, tapping
head and motorization guaranted by indexing
pin, lightweight head to simplify operation.
•t
The range is modular: Several possible
configurations, motorization can be used on
several dies.
•t
PRONIC - 170 rue des techniques - F-74970 Marignier
Tel: +33 450 89 49 49 - Fax: +33 450 89 49 49 - infos@pronic.com - www.pronic.com
- Strip guiding,
- Vertical strip follow (strip lift),
- Quick approach of the tapping head and strip
piloting.
The rates are optimal: tapping begins just after
the strip feeding, before the stripper contact.
•t
According to the proposed version, the turnkey «TK»
solution integrates the following functions:
The kinematics are totally controlled: full
guarantee of operation and optimized tapping
speed.
•t
These units have been studied to integrate the
commonly installed functions in the die directly and
compactly in the tapping head.
Reduced tapping station tooling costs: Design
and assembly of the tapping station is rapid and
implementation is less expensive.
The motorization is simplified and standardized.
• Wide flexibility of use and
management of the auxiliary movements by the M400
controller.
The tapping station tooling costs are significantly
reduced.
Advantages:
• Transmission by lead screw
linked to press slide.
FIPT-017c GB - TK RANGE - 10/2014t
• The template gear
unclutches in case
of overload or when
there is no hole to
tap.
The tapping station kinematics are totally
controlled.
These tapping units are designed with a removable
head and may be used for single or multi-tap
applications. The tapping head is driven either by
mechanical or by servo-driven motorization. The
two-part design simplifies operationsand enables
quick tap change.
www.pronic.com
"