KP_HTP1 Hand pump for pressure generation Riels0 pages
KP/HTP1
HAND-PUMP FOR
PRESSURE
GENERATION
PRESSURE
CONTROLS
Hand-pumps for pressure generation
suitable for use with digital manometers
Hand-pump K/P pneumatic
• Simple, portable pressure generation
• Pressure generation: from vacuum (negative pressure) up to 700 bar
• Connection for reference pressure meter (pump is supplied without reference pressure
meter)
Hand-pump K/P Pressure generation: -0,85…25/-0,95...40 bar Medium: Air
Tutti i dati ed i contenuti di questa scheda sono di proprietà esclusiva di Riels Instruments
Negative pressures/vacuums and pressures of up to 25 bar (max. 40 bar) can be generated
with this pneumatic hand-pump. Thanks to the fine adjustment valve (which is integrated in
the pump) and the relief valve, a calibration pressure can be set accurately and quickly.
This handpump is therefore highly suitable for testing manometers and pressure transmitters.
The pump is supplied without the carrying case, which is available as an option.
Weight: ≈1,1 kg Dimensions: 240 mm x 170 mm x 50 mm
Hand-pump HTP1 Pressure generation: 0…700 bar Medium: Oil or Water
Pressures of up to 700 bar can be generated with this hydraulic hand-pump. Hydraulic oil or
distilled water can be used as pressure medium (the pump is supplied without fluid).
The reservoir has a capacity of approx. 1 dl (100 ccm), thus allowing the pump to be used
with larger dead volumes. The hand-pump with its integrated fine adjustment and relief valve
is highly suitable for testing manometers and pressure transmitters.
The pump is supplied complete with accessories (hose, adaptor, etc.) in a stable carrying case.
Weight: ≈1,7 kg Dimensions: 255 mm x 176 mm x 70 mm
Hand-pump HTP1 hydraulic
The reference device for accurate measurement of the actual pressure is screwed directly
onto the hand-pump and is available as an option.
The matching reference devices for the pumps are listed below.
Please note the pressure range required for the pump:
K/P hand-pump = -1…30 bar HTP1 hand-pump = 0…700 bar
Carrying Case
Solid carrying case with interior foam cutout to fit one pump with manometer attached.
Additional compartments for tools, adapters etc. are provided.
For pump K/P: Weight: ≈900 g Dimensions: 400 mm x 365 mm x 110 mm (optional)
For pump HTP1: Weight: ≈1,1 kg Dimensions: 370 mm x 330 mm x 130 mm (inclusive)
* Matching reference devices for use with the K/P or HTP1 hand-pump (available as options)
MODELS
ACCURACY
LEX1
LEO1
LEO2
DV-2
MP
0,05% FS
0,2% FS
0,1% FS
0,1...0,5% FS
0,25% FS
Carrying Case
MEASURING RANGE
up to 1000 bar
up to 1000 bar
up to 700 bar
up to 700 bar
up to 1000 bar
LEX1
LEO1
Riels Instruments Srl
LEO2
+39 049 8961771
DV-2
+39 049 717368 www.riels.it info@riels.it
MP
"