t003 TRH Air Relative Humidity Transducer0 pages
t003 TRH
t003 TRH.doc (v. 03)
venerdì 10 dicembre 2010
Tutte le informazioni contenute in questo documento sono quelle attuali al momento della stampa, Siap+Micros S.r.l. si riserva il diritto di cambiarle senza alcun preavviso.
All the information content in this document are the current available at the printing phase. Siap+Micros reserve the rights to change the specifications without any advance notice.
Trasduttore Umidità Relativa
Air Relative Humidity Transducer
Principio di Misura: L’elemento sensibile è di tipo
polimero-capacitivo tagliato al laser (in un processo
termoregolato),
con
un
sistema
integrato
di
condizionamento del segnale. La struttura multistrato
dell’elemento sensibile determina un’eccellente resistenza
in condizioni di lavoro critiche quali: contatto con l’acqua,
polvere, sporcizia, olio o comuni prodotti chimici.
Sensori Intelligenti: Il trasduttore appartiene alla famiglia
dei sensori intelligenti in quanto dotato di micro-processore
interno che esegue tra altre funzioni di: controllo del
corretto funzionamento, pre-elaborazione dei dati,
conversione A/D dei segnali elettrici ecc. Queste
caratteristiche garantiscono eccellente accuratezza,
elevata affidabilità dei dati.
Certificato di Calibrazione: Il sensore può essere
corredato di certificato di calibrazione Siap+Micros oppure
da certificati rilasciati da altri laboratori esterni (SIT,
Colonnetti, ecc.).
Materiali e norme Internazionali: Il corpo del sensore è in
materiale plastico, lo schermo di protezione è realizzato in
ABS (materiale plastico resistente e non igroscopico), UV
resistente e a bassa capacità termica e in modo di
garantire una stabilità nel tempo e viterie in acciaio inox. Il
trasduttore è conforme a quanto previsto nella normative
Europea su EMC, è protetto contro le sovratensioni e
risponde
pienamente
alle
prescrizioni
dell’OMM
(Organizzazione Meteorologica Mondiale).
Measure principle: The sensing element is a laser
trimmed thermostat polymer capacitive sensing elements
with on-chip integrated signal conditioning. The sensing
element’s multilayer construction provides excellent
resistance to applications hazard such as wetting, dust,
dirt, oil, and common environmental chemicals.
Intelligent sensor: The transducer belongs to the
intelligent sensor family as based on a micro-processor
chip that execute among other functions: the correct
control functioning, data pre-processing, electrical signal
A/D conversion etc. This characteristics warranty
excellent accuracy, long-term stability and high data
reliability.
Laboratory calibration: The sensor can be supplied with
a SIAP+MICROS calibration certificate or with calibration
certificates issues by
external primary metrological
services (SIT, Colonetti, ecc).
Housing materials and International standards: The
transducer body is made of plastic material, the protection
shield is made on ABS (a resistant plastic material and
non-hygroscopic), UV stabilized material with low thermal
characteristics that assure long-term stability and with
stainless steel screws. The transducer complies with CE
EMC standards, it’s protected against over tensions and is
fully compliant within the WMO (World Meteorological
Organization) standards.
Codici d’ordine
Ordering codes
Descrizione
Trasduttore con uscita in corrente 4÷20 mA
Codice / Code
t003a TRH-I
Description
Transducer with current output 4÷20 mA
Trasduttore con uscita in tensione 0÷1 Vdc
t003b TRH-V
Transducer with voltage output 0÷1 Vdc
Trasduttore con uscita seriale RS485
t003c TRH-S
Transducer with serial output RS485
Per ordini o contatti commerciali
e-mail: sales@siapmicros.com
For further inquires or quotations
"