Portable Pump Filters Datasheet Specs0 pages

PORTABLE PUMP/FILTER UNIT CLEANS

CHIPS & SLUDGE FROM CUTTING OIL OR COOLANT

Thousands in Service • Shipped UPS from Stock

Keeping Solids Level Low in Sumps:

• Greatly increases tool life, minimizes tool breaking

due to dirty fluid

• Eliminates parts finish problems

• Reduces burden on high pressure filter

• Minimizes downtime and labor for manually

cleaning sumps

Keller Portable PFA-1002 Unit:

• Pulls from sump and continuously returns filtered

fluid to the sump at high flow rate

• No need to pump out sump or shovel solids

• Cleans a typical sump in minutes, then can easily

be moved to the next sump

• Portable PFA-1002 keeps multiple sumps clean

• Also filters and recycles fluid from chip spinners or

chip compactors

• Air-operated—No electricals—Inherently fireproof

How the PFA-1002 Works

The PFA-1002 contains a large bag filter and a high flow 1" air

operated diaphragm pump, mounted on a cart. The 8-foot inlet

and outlet wands, consisting of 5 feet of flexible hose and 3 feet

of rigid pipe, can access all corners of the sump. With both

wands inserted in the sump, the force of the filtered liquid

discharge scours the bottom of the sump to suspend chips and

sludge for pickup by the inlet wand. With a 20 gallon per minute

recirculation rate, the PFA-1002 cleans a typical sump in minutes

and then can easily be moved to another sump and set up simply

by connecting a 1/4" compressed air line.

"...The PFA-1002 is rugged and easy to use. It works

exactly as described, with negligible operating cost, and has

eliminated several costly problems. No more pumping out

sumps, no more problems of fines affecting parts finishes,

no more short runs with the high pressure coolant filter..."

—Marox Corp.

Complementary Products from Keller

• Flow-through Magnetic Separator can be installed on inlet to

PFA-1002 to remove the bulk of steel & iron particles

• In-line Coolant Filter with permanent cleanable filter element

protects through-the-spindle tooling

Keller specializes in equipment to maintain clean

metalworking fluids. Call Keller for recommendations.

"...For a modest investment, the two PFA-1002 units have

allowed me to increase shop throughput, avoid unscheduled

shutdowns, eliminate parts finish problems, and greatly

reduce labor costs for sump maintenance..."

—CSI Manufacturing

Ordering Information

PFA-1002

RCP-25

RCN-100

Ordering Designation

Includes all hoses, cart, and five 25 micron filter bags

Additional Filter Bags:

Box of five polyester felt bags, 25 micron

Box of five nylon mesh bags, 100 micron

Note: Other filter bags from 5 micron to 100 micron available

Specifications PFA-1002

Flow Rate 20 gallons per minute

Compressed air requirements 5 SCFM @ 20 to 125 psig

Electricals None

Dimensions of cart 20" x 30"

Shipping Weight (Shipped UPS) 100 lbs

Kvllnr PmrinrtG Inn Tei.1-800.352.8422,outsiders.pry264-wu

f\t?ffC7f II UUUUl&j I ill*. www.kellerproducts.net Fax (978) 264-0221

Bulletin K4106