SEWER-MAG0 pages
SEWER-MAGTM
Portable Flow-Through
Electromagnetic Flow Meter Sensor
Technical Specifications
Velocity measurement
Method
Range
Accuracy
± 0,2 m/s
Resolution
Material
Body
Lining
Electrodes
Electromagnetic full bore
± 0,001 m/s to ± 2 m/s
± 2% from reading at minimum
0,001 m/s
Stainless steel AISI304 (AISI316 optional)
PFTE
Stainless steel AISI316L
Hastelloy C276 (optional)
Titanium (optional)
Platinum/Rhodium (optional)
Others on request
Operating Temperature
The SEWER-MAGTM is an insertable full bore electromagnetic flow
meter sensor. It ensures extremely accurate flow determination
even under difficult flow conditions. The Sewer-Mag is usually
temporarily installed in sewer networks to verify or calibrate
existing flow meters.
The inflatable flow-through plug forces the water through the
measuring tube, which is maintained full with an especially
designed outlet elbow. The flow-through plug creates a straight
section (3x the pipe diameter) upstream the measuring point and
the outlet has a length of 2x the pipe diameter downstream.
The SEWER-MAGTM can be combined with 2 different electronics:
ML210 (AC or DC powered)
Mobile-Mag (DC or battery powered)
0°C to +80°C
Storage Temperature
-30°C to +80°C
Protection rate
IP68 (standing immersion with
1,5 m of head water)
How to select the correct dimensions of the SEWER-MAGTM?
The dimensions of the SEWER-MAGTM depend on the flow
range to be calibrated or measured and of the sewer pipe
dimensions. When the system is smaller, it is less expensive
and easier to install due to smaller overall dimensions and
less weight.
Flow range table depending on measuring tube size:
Min. Q (l/s)
DN65
DN80
DN100
DN125
DN150
DN200
DN250
DN300
DN400
Max. Q (l/s)
0,25
0,50
1,00
2,00
4,00
6,00
8,00
10,00
12,00
5,00
10,00
15,00
20,00
30,00
40,00
50,00
75,00
100,
Rue J.H. Cool 19a l B-4840 Welkenraedt l BELGIUM
www.flow-tronic.com
Tél.: +32 (0)87 899 799 l Fax: +32 (0)87 899 790
E-mail: info@flow-tronic.com