Process and quality monitored threadjing0 pages
Tauro
®
Process and quality monitored threading
The process monitoring happens during the machining
The system
Due to the integrated measuring and evaluation system the process parameters are analyzed
during the machining, what gives the possibility to automatically intervene in the process before
the part or tool gets damaged.
The process optimization
Cutting speed and parameter optimization
Cutting oil and tool optimization
Tool life optimization
Cycle time optimization
Process analysis
Profits
No additional monitoring system necessary
Detection of errors and deficiencies
Higher productivity
Shorter cycle times
Reduction of material rejects
Tool protection
Lower tool wear
Process evaluation
Quality assurance
Reduction of costs
Examples: Process deviation and error during the machining.
Monitoring of the maximum torque is always active to protect the tool.
The minimum torque is optional adjustable.
Additional parameters are evaluated in combination with the torque, i.e.: Depth, time, feed
orientation etc.
The torque is visualized as arrow around the tapping tool:
green
red
blue
pink
violet
correct torque
torque too high
torque too low
torque decreased
Error additional parameter
Janich-Design • In der Stockleiten 8 • 94372 Rattiszell / Germany
Phone +49 (0) 9964 / 6010140 • Fax +49 (0) 9964 / 6010139
www.thread-tapping.com • E-mail: mail@thread-tapping.com
File name: 11_04_19 Process_Monitoring.doc
Seite: 1 von 4