عضویت 
ورود اعضا
راهنمای خرید
DELIXI 11KV SCBH15F-CLASS EPOXY RESIN AMORPHOUR ALLOY DRY-TYPE DISTRIBUTION TRANSFORMER0 pages
POWER TRANSFORMER | Catalog
11KV SCBH15 F-class
epoxy resin amorphous
alloy dry-type distribution
transformer
1. Introduction
This kind of transformer uses amorphous alloy iron as its magnetic material, and uses epoxy resin to encapsulate the high
winding and low winding.
2. Model specification
S CB H □-□/□
"E- Voltage class(KV)
Rated capacity(KVA)
- Performance level code
— Amorphous alloy iron
Low voltage foil winding
— Epoxy resin
Three phase
3. Working condition
3.1 Altitude should not be over 1000m: indoor type
3.2 Highest ambient temperature should not over+40cC ; Highest daily average should not over temperature: +3013
3.3 Highest annual average temperature should not over +2013 , lowest temperature should not below -513
* Non-standard transformer is accepted to redesign as per customer requirement.
4. Reference standards
4.1 Dry type power transformer: GB1094.11-2007
4.2 Dry type power transformer technical parameters and requirements: GB/T10228-2008
37
"
