AT17F16A 16 Mbit In-System Programable PROM (3.3V) for Altera.0 pages

AT17F16A
FPGA Configuration Flash Memory
DATASHEET
Features

Programmable 16,777, 216 x 1-bit Serial Memories Designed to Store
Configuration Programs for Field Programmable Gate Arrays (FPGAs)
3.3V Output Capability
5.0V Tolerant I/O Pins
Program Support using the Atmel ATDH2200E System, ATDH2225 ISP Cable,
or Third-party Programmers
In-System Programmable (ISP) via 2-wire Bus
Simple Interface to SRAM FPGAs
Compatible with Atmel AT40K and AT94K Devices, Altera® FLEX®, Excalibur™,
Stratix®, Cyclone™ and APEX™ Devices
Cascadable Read-back to Support Additional Configurations or Higher-density
Arrays
Low-power CMOS FLASH Process
Available in 8-pad LAP and 20-lead PLCC Packages
Emulation of the Atmel AT24C Serial EEPROMs
Low-power Standby Mode
Single Device Capable of Holding Four Bitstream Files Allowing Simple
System Reconfiguration
Fast Serial Download Speeds up to 33MHz
Endurance: 10,000 Write Cycles Typical
Green (Pb/Halide-free/RoHS Compliant) Packages

Description
The Atmel® AT17F16A In-System Programmable Configuration PROMs
(Configurators) provide an easy-to-use, cost-effective configuration memory
solution for FPGAs. The AT17F16A is packaged in the 8-pad LAP and 20-lead
PLCC (Table 1). The AT17F16A uses a simple serial-access procedure to
configure one or more FPGA devices.
The AT17F16A can be programmed with industry-standard programmers, the
Atmel ATDH2200E Programming Kit, or the Atmel ATDH2225 ISP Cable.
Table 1.

AT17F16A Series Packages

Package

AT17F16A

8-pad LAP

Yes

20-lead PLCC

Yes

Atmel-3474F-CNFG-AT17F16A-Datasheet_012015