ChargeMaster Tiny (CM Tiny)0 pages

W W W . S I M C O - I O N . N L

Industrial Static Control

ChargeMaster Tiny
(CM Tiny)
The CM Tiny is the smallest industrial charging generator for static bonding applications. The unit has fully
integrated high voltage parts and only needs a 24V DC supply. The housing is compact, robust and only
weighs 500 grams which makes it perfect for small machines and applications with moving parts s.a. pick
and place handling systems. It can easily withstand the high G-forces occurring during the process.
Two LED’s on the side give clear indications of the status of the charging generator;
•t Green : Power is on
•t Green flashing : Power is on and HV output is inactive
•t Red : Alarm, HV overload or HV Ok signal short circuit
Indication LED’s on both sides of the end of the CM Tiny unit will display general information about the
status of the unit.
Status

High voltage

Leds

Initialisation

Off

Blink green @ 10Hz

Standby

Off

Blink green @1Hz

Normal mode

On

Green

Overload cycle OK

On

Blink red @5Hz

Supply voltage < 18V

On

Blink red @5Hz

Overload HV

On

Red

Temperature > 90°C

Off

Blink red/green @1Hz

The CM Tiny can be used directly from a machine interface capable of supplying a
4-20 mA signal for the setpoint and a 24V DC signal for remote on/off.
Manual operation can be implemented by an additional control circuit. The control
circuit enables you to mount a potentiometer and LED by simply providing 2 holes
in the front panel of your machine interface. Connectionblocks with one or four
outputs are available. For the use of the quick connect ports the charging electrode
has to be equipped with a special connector.