SKF Oil Check Monitor TMEH 10 pages

Quick detection of oil condition changes

SKF Oil Check Monitor TMEH 1
The SKF TMEH 1 measures the changes in dielectric
constant of an oil sample. By comparing measurements
obtained from used and fresh samples of the same oil, the
degree of change in the condition of the oil is established.
Dielectric change is directly related to the oil’s degradation and
contamination level. The monitor allows tracking of mechanical
wear and of any loss of the oil’s lubricating properties.
•t Hand-held and user friendly.
•t Numerical readout to facilitate trending.
•t Can store calibration (good oil) in its memory.
•t Shows changes in oil condition affected by such things as:
–– Water content.
–– Fuel contamination.
–– Metallic content.
–– Oxidation.

Note
The SKF Oil Check Monitor is not an analytical instrument. It is an
instrument to only detect changes in the oil condition. The visual
and numerical read-outs are merely a guide to enable trending of
the comparative readings of a good oil to a used oil of the same
type and brand. Do not rely solely on numerical readings.