RW 3000 - RW 4000 - RW 50000 pages
Capstan Winches for Pipe Renewal Systems 30 – 50 kN
RW 3000 - RW 4000 - RW 5000
®
The approved and compact Bagela Cable Pulling Winches in their new cover, made of Terpolymer (ABS).
Well-proven with compressors, excavators and other construction machines, the application of this material was
overdue for Pipe Renewal Winches.
The longevity of the winch aggregate in combination with this housing makes the winch a worth-stable
construction machine. For operation the soundproofed housing remains closed, only the cover of the control panel
has to be opened.
The winch is powered by a Diesel engine and is equipped with a steplessly controlled hydrostatic gear.
Every Bagela Pipe Renewal Winch is ouftitted with the automatic hold-on system. The required line pull can be
pre-selected by control of the hydraulic oil pump (pressure/flow control) which keeps the winching rope in
permanent tension even at varying pull resistance. This system ensures full self-control of the winch and is more
effective than manual control of the line speed. The line pull may be increased until the hydraulic overflow valves
are activated.
The winch itself is consisting of a twin capstan drive and rope storage drum with
automatic rope stacking device. The whole pulling force is generated by a
grooved double capstan system.
The chassis is spring mounted and approved with 100km/h (depending on
national road traffic regulations).
The winch is to be retained by two telescopic and pretensionable rear props and a
deflection boom against an end trestle.
Specifications are subject without notice. Output details are depending on use conditions.
Bagela
®
3
"