E-80000 pages
SERIES E-8000
Digital Readout / Control Systems
> Single and Dual Channel Modules
Bronkhorst High-Tech B.V., manufacturers of advanced mass flow
metering and control systems, offer digital Readout/Control Modules
for use with digital Mass Flow Meters/Controllers, Pressure Meters/
Controllers and other transmitters and transducers with RS232 communication. The E-8000 Series have one or two colour TFT displays per
module for indication of measured/totalised values and a push button
menu to easily enable the user to change the setpoint, reset the counter
value, select other fluids and many functions more.
> Features
> Multi Channel Configurations
ut right, wide angle, 1.8” display (TFT technology)
B
ut ser friendly operation, menu driven with 4 push buttons
U
utIndication/operation/configuration of
Based on the modular technique of the E-8000 series, it is easy to
assemble multi channel configurations in ½ 19” and 19” housings,
either for rack mount or table top. The exact number of channels to
be served with one (½ 19”) or two (19”) power supplies, depends on
the type of instruments (meters/controllers) to be connected. For most
applications one power supply can serve at least four channels.
-
measured value (direct or %)
setpoint
totalised flow
fluid / tag number
control characteristics
fieldbus settings
alarm functions (min/max, response, counter)
fluid selection (up to 8 fluids/curves stored in MFM/MFC)
> Specifications
tMechanical:
ut - or 2-channel table top housing (1 module)
1
ut - or 2-channel cassette for panel mounting (1 module)
1
ut 19” table top housing (max. 3 modules)
½
ut 19” rack housing (max. 3 modules)
½
ut 9” table top housing (max. 6 modules)
1
ut 9” rack housing (max. 6 modules)
1
ut s an option, ½ 19” and 19” housings can be supply with front
A
handles or carrying handles
ut n overview of the dimensions can be found on the last page
A
> Configurations for CEM-system
tElectrical:
For Controlled Evaporation Mixing (CEM) systems a single channel
module for temperature control can be integrated into a 1-channel
cassette and ½ 19” or 19” housings. This module is available with or
without display and with various fieldbus options.
ut Mains voltage 100...240 Vac (50...60 Hz)
ut Output signal/setpoint signal: Digital: FLOW-BUS (RS-485) or RS-232
ut
Option for CEM-modules only: PROFIBUS DP, DeviceNet™,
Modbus or EtherCAT® interface
ut Subminiature D-connector socket for RS-232 instrument connection
ut RJ45-connection for connection with FLOW-BUS communication
ut Power Supply capacity +24 Vdc, 1.25 A (30 W)