fittings0 pages

IMPACT RING TYPE FITTINGS

Fluoropolymer Fitting FIT-ONE

Designed with simplicity and easy of installation,

FIT-ONE overcomes the shortcoming which flare type fittings have in

common : lacking resistivity

The development of such revolutionary fitting is made possible by our

business model, introducing the following features :

^High resistivity against pulling^

makes a reliable fitting

FIT-ONE Impact-Ring design is a

perfect solution to the shortcoming

of general flare type fitting.

SPECIFICATIONS

Maximum Operating Temperature: 392°F

(Varies upon the Material of Impact-Ring)

Maximum Operating Pressure:101.5 Psi G

Applicable Fluid: Liquid

Applicable Tube Material; PFA or PTFE

Material: NUT: PFA

Body: PFA or PTFE

Small fluid pressure loss and easy replacement

of liquids

Low torque fastening nut helps securing the

flow of fluid path,minimizing the loss of fluid

pressure while decreasaing

liquid remnants.

As a result,

the replacement of liquids

can be carried out easily.

Click-Gauge as the fastening reminder

The Click-Gauge indicates the optimal fastening

location, maximizing the performance of the

fitting without damageing it.

Click Gauge

When the nut is fastened to the optimal

location of the body, the gauge will

notify the operator either through

vibration or sound

The Impact-Ring firmly grips the tube,

achieving high resistivity against pull.

The screw nut will pressure the Impact-Ring

when fastened to the designated location,

securing the conjunction between the tube and the body,

riu

116

101.5

B7

72.5

58

43.5

29

14.5

0

* Patent Pending

•Impact Ring Material PPS

Liquid Temperature °F

Assembly Method

Components and assembly tools

1. IMPACT RING

2. NUT

3. BODY

4. TUBE

5. HOT AIR GUN

6. FLARE TOOLS

NUT

TUBE

IMPACT RING i-v^

First insert a tube into the nut, then insert the Impact Ring.

Hot Air Gun

-High Temperature Hot Air

Tube

!!! Require uniform heating!!!

Insert the tube into flare tool ASAP,

and wait until tube is cooled down.

BODY

Insert flared PFA tube into the fitting body, then tighten the

' y' nut until the bottom paws of which contacts nut head and

click-Gauge.

(Notice : be careful of excessive )

P1