Go-fer III0 pages
GO-FER III ACCESSORIES
Produce machine quality welds and cuts
in any plane or position with a portable
drive on magnetic track
GO-FER III ACCESSORIES
GOF-3255 Welding Support Kit
GOF-3142 Radius Cutting Attachment:
Enables GO-FER III to be quickly
changed from a straight line to a circlecutting machine.
BUG-5166-8 H.D. Tube Rack w/Clamp
Size Range: 8" to 96"
(203 mm to 2438 mm) diameter.
BUG-9180-4 Rod 7/8 x 4"
CON-1020 Universal Clamp
The versatile GO-FER III Kits make straight line welding
and cutting more efficient and economical.
and cutting more efficient and economical
The addition of these 4
items provides a vertical
racking motion for hand
held guns.
Bug-O Systems is guided by honesty,
integrity and ethics in service to our
customers and in all we do.
BUG-2708 Fits All Clamp
Panograph Assemblies
Dual Torch Units
Panographs are spring-loaded devices that maintain torch
stand-off and compensate for plate surface irregularities.
Dual torch units are available upon request.
ARR-1090 Rail Alignment Tool
Gauging device for rapid alignment
of rails to joint
Rails & Attachments
ARR-1085 4' (1.18 m) Heavy Duty Rigid Rail
ARR-1080 8' (2.37 m) Heavy Duty Rigid Rail
BUG-5485 Contactor/Cable Anchor:
Provides built-in contactor switch to control
plasma or welding process. The Cable Anchor
provides strain relief for all cables.
AFR-3000 Semi-Flex Rail can be bent inside or
outside to a minimum radius of 15' (5.0 m) or 30'
(10.0 m) diameter without permanent deformation.
AFR-2010
Swivel Magnet for AFR-3000
Rail only.
250 lbs. Holding Power
ARM-2015
Spacer Bar
for ARR Rail
only.
PAN-1007
Welding Panograph
Assembly
ARM-2010
On-Off Magnet Plate Assembly for ARR Rail
only. Holding power 250 lbs. (113.4 kg)
Can be switched on and off for rapid set-up.
PAN-1010
Cutting Panograph
Assembly
Vacuum Systems For Non-Ferrous Metals
Standard Vacuum Support Kits:
t ARV-1080 Vacuum Kitt
tt For ARR-1080 & AFR-3000 Rails.
t ARV-1085 Vacuum Kit
tt For ARR-1085 Rails.
Custom systems are required for Bent Rail.
ARV-2020t 120 Volt/50-60 Hz
ARV-2030t 220 Volt/50-60 Hz
The ARV-2020 (ARV-2030) Vacuum
Pump Kit is recommended for use with
a maximum of four (4) pieces of rail,
or sixteen (16) vacuum bars.
ARV-1080 Vacuum Kit for
ARR-1080 8' (203 mm) Rigid Rail.
ARV-1085 Vacuum Kit for
ARR-1085 4' (102 mm) Rigid Rail.
MUG-1119-32
3-Hose Assembly
BUG-9898
3-Hose Quick-Acting
Manifold
CIR-1010-3
2-Hose Assembly
5
GOF-3025
2-Hose Quick-Acting
Manifold
ARV-1080 Vacuum Kit for
AFR-3000 8' (203 mm) Semi-Flex Rail.
A QUALITY PRODUCT FROM BUG-O SYSTEMS • 280 TECHNOLOGY DRIVE • CANONSBURG, PA 15317-9564 USA
A DIVISION OF WELD TOOLING CORPORATION © Weld Tooling Corp.
ROM 1:16 Litho in U.S.A. LIT- GOFER-BRO-0313
Bug-O Systems
Affordable Track Cutting
and Welding Systems
412-331-1776 www.bugo.com
"