عضویت 
ورود اعضا
راهنمای خرید
Specification sheet CLARK C PS 10 Ligth0 pages
o | 1.1 Manufacturer | Clark |
.22 | 1.2 Manufacturer's model designation | C PS 10 light |
o | 1.3 Drive : E ( electric ) | E |
re | 1.4 Type of control : T (tiller) S (steering wheel) A (pedestrian) P (standing) R (seated) | T/A |
Jz o | 1.5 Load capacity Q (t) | 1.0 |
1.6 Load centre distance c ( mm ) | 600 | |
1.8 Load distance, centre of drive axle to fork X ( mm ) | 700 | |
1.9 Wheelbase Y ( mm ) | 1.350 | |
« | 2.1 Service weight ( battery included ) Kg | 660 |
o | 2.2 Axle loading (with load) front / rear Kg | 530/ 1.130 |
2.3 Axle loading (without load ) front /rear Kg | 452/208 | |
» | 3.1 Tyres : pit ( polyurethane ) vlk ( vulkollan ) | pit |
Cft re | 3.2 Front wheels size mm | 190 |
.c O | 3.3 Rear wheels size mm | 85 |
(A | 3.4 Stabilizers wheels dimensions mm | 150 |
O o | 3.5 Wheels : number front / rear ( x = traction ) | 1x+ 1 12 |
I | 3.6 Front track width b 10 | 520 |
3.7 Rear track width b 11 | 380 | |
4.2 Lowered mast height M ( mm ) | 2.005 | |
o cft | 4.3 Free lift h5 ( mm ) | 85 |
c o | 4.4 Lifting height h3 ( mm ) | 2.815 |
£ Q | 4.5 Extended mast height h4 ( mm ) | 3.400 |
4.9 Height of tiller arm in drive position ( min / max ) h14(mm) | 840/ 1.295 | |
4.15 Forks lowered height h13(mm) | 85 | |
4.19 Total length 11 ( mm ) | 1.905 | |
4.20 Length to forks face 12 ( mm ) | 754 | |
4.21 Overall width b1 / b2 ( mm ) | 800 | |
4.22 Forks dimensions s / e /1 | 70/ 180 / 1.150 | |
4.24 Fork carriage width b3 ( mm ) | 630 | |
4.25 Width over forks b5 ( mm ) | 560 | |
4.32 Ground clearance laden m2 (mm) | 15 | |
4.33 Aisle width for pallets 1000 x 1200 forking side 1200 Ast3 ( mm ) | ||
4.34 Aisle width for pallets 800 x 1200 forking side 800 Ast3 ( mm ) | 2.227 | |
4.35 Turning radius Wa ( mm ) | 1.545 | |
0) o | 5.1 Travel speed laden / unladen Km / h | 2.8/3.3 |
u c | 5.2 Lifting speed laden / unladen m / s | 0.125/0.20 |
1 | 5.3 Lowering speed laden / unladen m / s | 0.30/0.17 |
1 | 5.7 Gradient performance ( S2 30 min ) % | |
o Q. | 5.8 Max gradient performance ( S2 5 min ) % | - |
5.10 Service brake M ( mechanical) I ( hydraulic ) IV (inversion braking ) | M-IV | |
o | 6.1 Traction motor, rating S2 60 min KW | 0.7 |
o | 6.2 Lifting motor, rating S3 15% KW | 2 |
LTj | 6.3 Battery according DIN 43531 / 35 / 36 A, B, C, no | no |
6.4 Battery voltage, nominal capacity K5 V / Ah | 2x12/100 | |
o.o DdUciy Wciyni ^ x o /o / r\g | 2 x 30 | |
S2 o | 8.1 Type of travel control | DC |
o | 8.4 Sound level at driver's ear dB(A) | < 70 |
Technical specification according to VDI 2198 | ||
All values shown are for standard lift truck with standard equipment. If the truck is supplied with options, values may change. All values given may vary +5% and -10% due the motor and system tolerances and represent nominal values obtained under typical operating conditions. Specification for Non-emission limited truck. | ||
www.clarkmheu.com
e | ||||
10 | m bll b | |||
.... | ||||
\ a/2 a/2 , | r | |||
Ast3 | ||||
double load wheels | 0 |
push button for vertical operation | 0 |
electronic braking system | s |
electronic speed control | s |
electromagnetic parking brake | s |
BDI/hour meter with lifting cut-off at 80% discharge | s |
built-in charger | s |
s=standard o=optional | |
h3 hi h4 h.5 | (Q)t |
1.565 sx mm 2.085 2.085 1.565 2.815 dx mm 2.005 3.400 85 | 1.0 0.8 |
