DeFelsko Coating Thickness Standards0 pages

"

DeFelsko Coating Thickness Standards

nnnn

Certified coating thickness standards are ideal for verifying the

nnnn

accuracy and operation of coating thickness gages and are an

nnnn

important component in fulfilling both ISO and in-house quality

nnnn

control requirements.

nnnn

Many organizations require verification of gage accuracy at the

nnnn

test site each time a coating thickness gage is put into service

nnnn

and at frequent intervals during use. Ideal for this purpose,

nnnn

DeFelsko certified coating thickness standards have measured

nnnn

values traceable to a National Metrology Institution.

nnnn

Certified Coated Metal Plates

nnnn

and Polystyrene Blocks

nnnn

■ Used to verify the accuracy and operation of any Type 1 (mechanical)

nnnn

and Type 2 (electronic) magnetic, eddy-current or ultrasonic coating

nnnn

thickness gage

nnnn

■ Ideal for use in the calibration lab, in the field or on the factory floor

nnnn

■ Standards with steel or aluminum substrates consist of 4 plates

nnnn

mounted in a protective binder

nnnn

■ Polystyrene thickness standards consist of 4 blocks supplied

nnnn

in a rugged acrylic storage box

nnnn

■ Individually serialized for traceability to NIST or PTB - includes a

nnnn

Certificate of Calibration

nnnn

■ Certified and labeled in both Metric and Imperial units

nnnn

Coating

nnnn

gas

nnnn

Plate Diameter: 38 mm (1.5 ")

nnnn

Measurement Diameter: 25 mm (1'

nnnn

Polystyrene Blocks: 38 x 70 mm (1.5" x 2.75"

nnnn

A1

nnnn

Non-Ferrous

nnnn

Individual plates

nnnn

are available

nnnn

Order Code	Ideal for	Approximate Thickness				Coating/ Substrate	Accuracy
		Plate 1	Plate 2	Plate 3	Plate 4
S1	PosiTector 6000 F, FS, FRS, FN, FNS, FNRS PosiTest F & FM	0	75 um 3 mils	250 um 10 mils	1500 um 60 mils	Epoxy on Steel (Ferrous)	+/- 0.43 um +/- 0.017 mil
S2	PosiTector 6000 FOS, F45S, F90S PosiTest DFT Ferrous & Combo	0	75 um 3 mils	250 um 10 mils	1000 um 40 mils
S3	PosiTest G & GM PosiPen A, B & C	0	15 um 0.6 mils	40 um 1.6 mils	100 um 4 mils
A1	PosiTector 6000 N, NS, NRS, FN, FNS, FNRS	0	75 um 3 mils	250 um 10 mils	1500 um 60 mils	Epoxy on Aluminum (Non- Ferrous)	+/- 0.43 um +/- 0.017 mil
A2	PosiTector 6000 NAS, NOS, N45S, N90S PosiTest DFT Combo	0	75 um 3 mils	250 um 10 mils	500 um 20 mils
A3	PosiTector 100B, 200, 200B	75 urn 3 mils	125 um 5 mils	250 um 10 mils	500 um 20 mils
P1	PosiTector 6000 FT, FTS, NTS, FNTS PosiTector 200 D	375 um 15 mils	2 mm 80 mils	4.5 mm 185 mils	6.5 mm 250 mils	Polystyrene Blocks	+/- (2.5 um + 0.05% of thickness) +/- (0.1 mil + 0.05% of thickness)
P2	PosiTector 6000 FHS, NHS, EOC	2.5 mm 100 mils	6.5 mm 250 mils	13 mm 500 mils	19 mm 750 mils
P3	PosiTector 100C	375 um 15 mils	1.5 mm 60 mils	2.5 mm 100 mils	4.5 mm 185 mils
P4	PosiTector 100D	1.5 mm 60 mils	2.5 mm 100 mils	4.5 mm 185 mils	6.5 mm 250 mils
P5	PosiTector 6000 FKS, NKS	1.5 mm 60 mils	2.5 mm 100 mils	6.5 mm 250 mils	12 mm 480 mils
P6	PosiTector 200C	375 um 15 mils	1.5 mm 60 mils	2.5 mm 100 mils	3 mm 125 mils
P7	PosiTector 6000 FHXS	1.5 mm 60 mils	4.5 mm 185 mils	6.5 mm 250 mils	9.5 mm 375 mils

nnnn

Select the Standard that most closely matches the measuring range of your gage.

nnnn

All certified standards are supplied with a Certificate of Calibration traceable to NIST or PTB.

nnnn

Made in U.S.A.

"