SENSOMAT0 pages

"

SENSOMAT

nnnn

The Control Screwdriver with regulated clutch function

nnnn

Seating torque from 0.3 - 5 Nm (3 - 44 in.lbs)

nnnn

• Thread forming with maximum

nnnn

motor power

nnnn

• Seating torque less than

nnnn

driving torque

nnnn

• Thread forming instead of

nnnn

thread damaging

nnnn

• ergonomie

nnnn

• robust

nnnn

Our pneumatic handheld screwdrivers

nnnn

SENSOMAT with mechanical clutch func-

nnnn

tion are particularly suitable for applica-

nnnn

tions such as:

nnnn

• Sheet metal assemblies

nnnn

• Wood assemblies

nnnn

• Self-tapping through bolts

nnnn

The SENSOMAT has been specially de-

nnnn

signed for screw joints where the screw-

nnnn

driving torque (forming torque) Is close to

nnnn

or even higher than the shut-off torque

nnnn

due to high friction during assembly.

nnnn

In this way for example thread forming

nnnn

or thread cutting screws can be reliably

nnnn

processed with this screwdriver which is

nnnn

equipped with a mechanical clutch lock -

nnnn

there Is no chance of damaging the screw

nnnn

by over-tightening.

nnnn

The SENSOMAT control screwdriver tigh-

nnnn

tens the screw with full motor torque. Just

nnnn

before the base of the screw head Is sea-

nnnn

ted, the shut-off clutch is released and

nnnn

the screwdriver switches off exactly at the

nnnn

pre-set torque. The screw is completely

nnnn

screwed In without damaging the screw

nnnn

connection.

nnnn

The SENSOMAT a further development

nnnn

of the well-known MINIMAT screwdrivers

nnnn

achieves high torque accuracy and low

nnnn

± 3% standard deviation with the help of

nnnn

the highly accurate shut-off clutch.

nnnn

When used under the correct conditions

nnnn

DEPRAG pneumatic screwdrivers with

nnnn

shutoff clutch conform with a Cmk value

nnnn

of >1.67 with ±10% tolerance In relation

nnnn

to 6 Sigma according to ISO 5396.

nnnn

h other words a Cmk value of 1.67

nnnn

means that there is a failure rate of 0.6 per

nnnn

million screw assemblies.

nnnn

D 3460 E 05.2012

"