ROBOCUT a-C400iA0 pages

Alpha C400iA Mechanical specications
Standard
Maximum workpiece dimensions without automatic door, standard Z axis travel [mm]
Maximum workpiece mass [kg]
XY axis table travel [mm]
Z axis travel [mm]

700 × 600 × 250
500
370 × 270
255

UV axis travel [mm]

± 60 × ± 60

Maximum taper angle [ ° / mm]

± 30° / 80

Small step sizes of the drives [mm]
Wire diameter [mm]
Maximum wire mass [kg]
Footprint (W/D) [mm]
Machine mass (approx.) [kg]
Controller
Part program storage size [MB]

0,0001
Ø 0.10 ~ Ø 0.30
16
1930 × 2210
1800
FANUC 31i-WB
4

Acoustic noise level
LPA [dB]

64

LPCpeak [dB]

81

Optional
Automatic front door
Installing Conditions
Power supply

AC200V±10% 3-phase 50/60Hz ±1Hz, AC220V±10% 3-phase 60Hz ±1Hz,
Connection cable terminal size: 8-5, Power consumption: 13kVA

Air supply

Air pressure: 0.5 - 1.0 MPa, Flow rate: 100L / min or more: 120L / min or more
(with a thin wire option) *Regulator-side coupler mounting screw: Rc1/4

Shield room

If discharge noise can interfere with surrounding radio, television and other sets,
a shield room needs to be created

Environment

Ambient temperature: 15-30°C, *Recommend 20±1°C for high precision machining.
Install under the oil mist free and dust free environment. Humidity: 75% RH or less

Grounding

The unit must be grounded to avoid damage resulting from electro-magnetic
interference or electrical leakage. The grounding itself should be of type C
(grounding resistance of 10Ω max.) as specied in the electrical installation
standards and should be carried out independently of the grounding of any other
piece of machinery(one piece grounding).

Maximum workpiece dimensions with automatic door, Z axis travel [mm]
Z axis travel [mm]
Maximum taper angle [mm]
Wire diameter [mm]

700 × 555 × 250
± 45°/40
Ø 0.05 ~ Ø 0.30