FPI-HR, Signal Conditioner0 pages
General Temperature and Pressure Applications
Application Products
FOT-L Temperature sensor
FOP-M Pressure sensor
FPI-HR module
EVOLUTION chassis
Key Features
High accuracy
Up to 250 Hz sampling rate
Temperature-compensated modules
Specications
PRESSURE – FOP-M
−10°C to 120°C
R1: 0 to 5 psi / R2: 0 to 50 psi
R3: 0 to 150 psi / R4: 0 to 1000 psi
Temperature operating range
SD: −40°C to 300°C
BA: −40°C to 250°C
−20°C to 150°C
Response time1
Sensor
TEMPERATURE – FOT-L
Measuring range
<1.5s
—
2
R4: ±0.25°C / R5: ±0.40°C
±0.5% of full scale
Resolution
0.01°C
0.05% of full scale
Sampling rate
Up to 250 Hz per module
Up to 250 Hz per module
Power consumption
FPI-HR Module
Accuracy
5 Watts
5 Watts
Analog output (Optional)
0 to 5V or 4–20 mA / 16 bits resolution
0 to 5V or 4–20 mA / 16 bits resolution
Operating temperature
10ºC to 50ºC
10ºC to 50ºC
Storage temperature
−30ºC to 80ºC
−30ºC to 80ºC
Connector
SCAI3, SCA (ST optional)
SCAI3, SCA (ST optional)
Fiber core size
62.5/125μm (50/125μm optional)
62.5/125μm (50/125μm optional)
Number of channel(s)
1 or 2
1 or 2
Communication / Evolution chassis
USB via EVO chassis / TS 35 DIN RAIL
USB via EVO chassis / TS 35 DIN RAIL
Communication/OEM
RS-232 / RS-485
RS-232 / RS-485
LED sensor signal and communication diagnostic
Yes
Yes
1. Time required to reach 63% of a temperature step.
2. Includes reproducibility (sensor/module exchange), repeatability and hysteresis,
non-linearity, scale error, offset error, conditioner temperature compensation error.
Temperature:
Accuracy of ±0.25°C can be achieved using the 25°C to 45°C calibration.
Accuracy of ±0.40°C can be achieved using the −10°C to 120°C calibration.
Pressure:
Accuracy at room temperature.
3. SCAI is an SCA connector with smart chip communicating calibration data to signal conditioner module.