SOM 2000 pages

This unit is designed for the automatic
treatment and handling of waste water
with emulsified hydrocarbons,
particulate matter, dyes, inks, etc. The
unique design allows for total
integration with any of the units in the
Flexo Wash line, to further enhance full
automation in cleanup and waste
management.

2m3 / day
400 V – 3 phase
0.2 KWh/m3

An automatic controlled pump, feeds
the waste water into the reactor of
the Split-O-Mat plant.

3)

When the reactor is full, the mixer is
put into operation by adding the
splitting agent ENVIFLOC® 1010 a
blend of balancing minerals and
chemicals.
The waste water is flocculated with
the contaminants clinging to the
minerals to create a filterable matter.
The water/sludge mixture drains
through the filter paper as it rolls
along on a conveyor, which is
triggered into action automatically as
needed.

6)
Liquid Volume
Processed
Required Power
Operating Costs

2)

5)

1300 x 810 x 1400 mm

The waste water is collected in a
buffer tank.

4)

Dimensions

1)

The water is discharged into the
drainage system, while the sludge
water is deposited into a container,
for later disposal in landfill or
incinerator.

This product is essential in plants where waste by-products are driving up the cost of production.
It is also a superb compliment to the closed-loop cleaning systems designed by Flexo Wash.
Grenåvej 631 K • 8541 Skødstrup • Denmark • tel.: +45 86 99 36 31 • fax: +45 86 99 13 43
www.flexowash.com • info@flexowash.com