عضویت 
ورود اعضا
راهنمای خرید
Series CEB, 65 ltr/min, 15 bar, 60 °C0 pages
CEB 2000
Closed coupled vertical tank pump
Manetic drive with special NPSH impeller for AutoGas filling stations
Technical data
Output
:
max. 65 l/min
Differential pressure
:
max. 15 bar
Speed:
:
2900 1/min
Temperature
:
max. - 40 o C to + 60 o C
Casing pressure
:
max. PN 40
Shaft sealing
:
Sealless magnetic coupling
Flange connection
:
DIN 2501 PN 40
Direction of rotation
:
Anti-clockwise, when seen from the
drive end
Casing material
:
EN JS 1025
(nodular iron GGG40.3)
ATEX 94/9/EC
:
Ex II 2 G c T1-T5
Application
Vertical, extended tank pump essentially for handling liquids that
are either boiling or stored at their vapour pressure. Particularly
suited to AutoGas filling stations.
One of the primary features of this side-channel type of pump is the
special suction impeller that requires extremely low levels of NPSH.
CEB pumps have been specifically designed for use with Liquefied
Petroleum Gas and other liquefied gases.
Design
SIHI side channel units are a low noise design of combination
pump. They are ideal for pumping liquids that are stored at their
boiling point, have a degree of entrained gas, or very low NPSH
conditions. The vertical tank pump has been designed in order to
enable retro-fitting into most common tanks. Moreover, the
dimensions are such that the unit can be used to replace
submersible designs of pump.
Although the pump can be supplied in other lengths, the standard
size is between 1.3 -& 3.0 m.
Construction
Casing pressure:
Max. 40 bar from –40oC up to +60oC.
Please observe:
Technical and safety regulations that apply to installation.
Casing pressure = inlet pressure + delivery head at minimum
output.
Flange position:
Tank flange vertical, discharge flange horizontal.
Connection:
Flange design to DIN 2534 / PN40 or DIN 2512 with groove and
spring. Other drillings available upon request.
ANSI 300 as well possible.
Hydraulic:
Side channel hydraulic with NPSH inducer stage.
133.52210.52.01 E
Bearing:
Two product lubricated SiC sleeve bearings with plus additional
intermediate bearings throughout the extended shaft.
Shaft sealing:
Sealless/Magnetic drive. Power transmission effected by magnetic
coupling. Importantly, this is a modular design adapted from our
extensive range of sealless pumps.
Casing seal:
The static casing seals are made from seal liquid.
Drive:
By standard electric motor, IM V1or B5.
PUMP TECHNOLOGY CEB 2000
05/2015
