7WD, Visus, MassControl -0 pages
The glazing Robot working is integrated with three logic operators complete
with proper equipments: 7WD® for programming, Visus® and Mass
control® for the control.
The strenght
to the brain
Società Certificata ISO 9001 n° LRC160181
Strada Statale 415 km 27 - 26010 Vaiano Cremasco (CR) - Italy
Tel. +39.(0)373.279111 - Fax +39.(0)373.279299
e-mail: info@gaiotto.it - e-mail: sales@gaiotto.it - www.gaiotto.it
FUNCTIONS FEATURES
Drawing arrangement from CAD system and digitizer
Graphical and three dimensional visualization of the piece
Graphical representation of the robot trajectories
Graphical simulation of the robot trajectories
Graphical simulation of the glaze thickness
Programs generation for Gaiotto glazing robot
Programs transferring by serial port or floppy disk
Windows working platform with the following features:
¡ Intel Pentium 4 processor 1,8 GHz
¡ RAM 512 Mb
¡ Graphical card 3 D 128 Mb
¡ Hard disk 40 Gb
¡ Working system Windows 2000
Icons graphical interface
OUTFITS
Industrial PC:
¡ Passive backplane
¡ 1 parallel door, up to 4 serials 422
¡ Drive door 3,5”, HD 2Gb
¡ Board with Pentium processor
¡ 16 Mb RAM
¡ 17”monitor
Visus system:
¡ Up to 4 linear CCD with 256 grey tones, 1728 pixel resolution
and lens Cmount with focals from 2,6 up to 12 mm
or
¡ Up to 4 CCD with 256 grey tones with resolution of 752 x
582 pixel, acquisition speed from 1/125 up to 1/10.000 of
sec. and lens with connection of 35 mm and focals from 28
up to 200 mm
FUNCTIONS OUTFITS FEATURES
Operator interface with graphical display
Electropneumatic regulation
of the pressure 0-10 bar by a valve
with proportional management
Differential alarm warnings
with minimum values of 1 gr
Management up to 8 different
products/colours
Multilanguages software
Delivery measurement sensor
as per Coriolis principle
Serial communication card Rs 485
Delivery measurement precision +/- 2 gr
Speed control: 50 measures/ sec
Spraying control up to 10.000 gr/min