e.rack A6-16 slimline Carrier frequency unit for 16 strain gauge and inductive half and full bridges as well as LVDT.0 pages
Carrier Frequency Bridge Unit
The e.rack slimline is designed for industrial and experimental test systems requiring precise high speed measurement of electrical, thermal, and mechanical quantities in engine and component test beds. The e.rack slimline is a low profile rack mount design, and easily connects to the wide variety of field devices used in today'stest beds. Sample rates up to 1000 Hz and resolutions up to 19 bit are possible depending on the unit and signal type used. Standardized communication protocols (Profibus-DP and Modbus-RTU) allow the e.rack slimline family to work with a wide variety of application hardware and software (including e.bloxx). All of this measurement power is housed in a 1 unit (1U) 19 rack for unparalleled density. With the addition of an e.series controller (e.gate, e.pac, etc.) even the most sophisticated applications can be achieved with ease. >
nn16 universal bridge inputs
Strain gauge full and half bridges, inductive bridges, LVDT, etc. >
nn1 analog output per channel
Ա 10 V, user configurable (e.g. maximum, envelope curve, etc.) >
nnSignal conditioning
Linearization, digital filter, scaling, taring, minimum/maximum store, enve-lope curve, arithmetic, alarm, limit value, tolerance band >
nnRS 485 fieldbus interface
Profibus-DP, Modbus-RTU, ASCII >
nnOrder Information Additional Features
Product Article No. Accuracy 0.05 % e.rack A6-16 slimline 438381 AccessoriesConfiguration Software ICP 100 633214 Input plug series 423 8 pole 423 8P Interface Converter RS232 / RS485 ISK 101 689326 Transducer connection in 3, 4, 5, and 6 lead connection (excitation sense) Wide measurement range 2.5, 100, and 1000 mV/V Frequency range 0 to 100 Hz (-3 dB) ADC resolution and internal calculation accuracy of 19 bits (500 samples/sec) Data transmission up to 1.5 Mbps PC-Software (ICP 100) for easy configuration of the modules Compatible with all e.series controllers (e.gate, e.pac, etc.) Galvanic isolation of I/O signals, power supply, and communication interface Electromagnetic Compatibility according to EN 61000-4 and EN 55011 >
Gantner Instruments Test & Measurement GmbH www.gantner-instruments.com office@gantner-instruments.com Montafonerstrae 8 A-6780 Schruns / Austria T +43 (0) 5556 73784-410 F +43 (0) 5556 73784-419Industriestraߟe 12 D-64297 Darmstadt / Germany T +49 (0) 6151 95136-0 F +49 (0) 6151 95136-26 size="-1">