Industrial DC Motors and Gearmotors CLL Motors0 pages

CLL MOTORS
E-2006
DC Alnico Permanent Magnet Motors
power rating: .015 hp (11.2 W)
voltage: 6 to 75 VDC
weight: 5.2 ounces
armature: Dynamically balanced
inertia: 7.4 x 10-5 oz. in. sec.2
electrical time constant: 0.5 millisecond max
mechanical time constant: 15.0 milliseconds max
typical no load torque: 0.5 oz. in.
shaft: Precision-ground stainless steel. Options: length,
smaller diameter, flats, pinions, gears, holes (through or
tapped), threaded ends and tapers. Shaft material may
change depending upon options selected
magnets: Alnico V
bearings: Ball bearings are double shielded, life-lubricated
cover: Corrosion-resistant aluminum
frame: Die-cast aluminum
end bell: Precision-molded, fiberglass-filled Diallyl Phthalate
winding temperature rise: 7°C per watt w/8.00" x
8.00" x .25" aluminum heat sink
Dimensions
winding insulation rating: 130°C (higher temperature
windings available)
options available:
• Gear train (see Bulletin E-2030)
4-40 UNC-2B
.187 MIN DEEP
(2 HOLES)
SCREW PROJECTS
.083 BEYOND O.D.
1.059
1.057
DIA
1.260
DIA
MAX
.052
2.090 MAX
.1248 DIA
.1246
.500
.338
.338
TYP
ROTATION (VIEWED FROM SHAFT END)
CCW - POSITIVE VOLTAGE TO (+), NEGATIVE VOLTAGE TO (-)
CW - REVERSE POLARITY
NOTE: Consult factory prior to preparing spec control prints. Dimensions are for reference only
8
© 4/01 Globe Motors