Lubricus M0 pages
Technical Information LUB-M
Lubricus M Lubrication System
Depending on the model, the Lubricus Lubrication System has 2, 4, 6, 8 or 10 outlets (LUB-M2/LUB-M4/
LUB-M6/LUB-M8/LUB-M10). The Lubricus type LUB-M is made for a 24 VDC power supply and requires a
mains connection. The lubricant reservoir (1500 cm³) is in a disposable cartridge. Supply pressure is <70
bar.
Lubricus M - Function
The Lubricus M Lubrication System is optionally
equipped with up to five pump bodies (P1, P2, P3, P4,
P5) each with two outlets. The pistons of the Twin-piston
pump move alternately and provide same quantities of
lubricant.
Lubricus M can work either in time mode or in pulse
mode.
Time mode: The integrated electronics control and
monitor the amount of lubricant and the time intervals
between lubrications.
Pulse mode: Lubricus M can also be controlled by the
PLC system and allow you to set the delivery rates and
time between the lubrication intervals individually by
pulse signals.
M
Time control OR pulse control
Operating pressure is max. 70 bar
Error messages shown on display
Operating temperature -20°C up to +70°C
Monitoring and feedback function
Separate control of each pump body
Simple handling/PIN protected
For grease up to NLGI class 2