RENUVO Multi-Purpose System MPS (v4)0 pages

MPS
U V C u r i n g C o m p o s i t e Te c h n o l o g y
Multi-purpose System
NEW: UV curing resin system for Turbine Blade repair. Fast curing single component resin developed to work even
in low temperatures, saving time, effort and waste in all repair formats.
n UV Curing resin system with dedicated RENUVO™ Lamp Technology
n Summer grade material for use at +15OC to +30OC
n Winter grade material for use at +5OC to +18OC
n Compatible with current topcoat solutions
n Mono-component resin technology
n Thicknesses up to 3mm for single cure operation
n Clean processing avoiding mixing and contamination
n GL Certified product range
n User friendly 310ml cartridge format
Introduction
RENUVO™ Multi-Purpose System (MPS), is a breakthrough UV curing resin system, developed by Gurit as a repair
system for turbine blades. The system can be used either as a stand alone spot repair or in combination with
RENUVO™ Prepreg for a structural repair.
RENUVO™ MPS offers a step change in materials for the repair market. With working temperatures as low as +5OC,
MPS has demonstrated a practical solution to an engineering problem, how to perform repairs quickly at these
temperatures. For this reason, 2 specific grades of material have been formulated to give the operator the right
material for both hot and cold environments.
The Mono-component RENUVO™ MPS resin eliminates the human error of mixing, dispensing and working with
traditional 2 component repair systems. Additionally the material offers the operator the security that wherever the
material has been sourced it is the same product manufactured to the same high exacting process.
Using a dedicated UV source, ideally RENUVO™ Lamp Technology, RENUVO™ MPS is cured in 90 seconds for a
simple spot filler type repair, up to 3mm thickness. Used in combination with RENUVO™ Prepreg the MPS product
acts as the perfect primer to give the perfect air free bond surface.
PDSWE-RENUVO MPS-4-0911
1