MODEL S12M0 pages

12” HYDRAULIC SUBMERSIBLE
AXIAL FLOW HIGH VOLUME PUMP
MODEL S12M
12” (300 mm) Discharge
The S12M is designed for pumping
high volumes of water at low to
medium heads. This pump is great
for lake draining, flood control,
drydock, foundation and cofferdam
de-watering.
FEATURES
•
•
•
•
•
•
•
•
SPECIFICATIONS
High Volume Axial Flow design
WEIGHT:.......................................... 385 lbs. (174 kg)
High Efficiency mixed flow impeller
Small Overall Size allows for use in
tight spaces
HEIGHT:................................................. 41" (104 cm)
DIAMETER (@ widest point):................... 21" (53 cm)
DISCHARGE:...................12.75" O.D. Pipe or Flange
SOLIDS HANDLING:................................ 1" (25 mm)
Variable Speed hydraulic drive
Oil Lubricated Seals (can run dry)
HOSE PORTS:.................................................1" NPT
HYDRAULIC COUPLINGS:............ 1" Wing Nut Style
PUMP BODY:............................................... Cast Iron
Dependable gear type hydraulic motor
Safe Hydraulic Drive can be used
where electric power is hazardous or
impractical
IMPELLER:...................................................... Bronze
SHAFT:............................................... Stainless Steel
SHAFT SEALS:........................ Carbon/Ceramic (Std)
ELASTOMERS:...................................... Buna N (Std)
HYDRAULIC OIL:...... 214-320 s.s.u. @ 100°F (64°C)
Operates with our HT35 to HT60 power
units or other hydraulic power sources
capable of flows of 20 - 26 GPM
INPUT FLOW:....................... Max. 26 GPM (98 LPM)
INPUT PRESSURE:.. Max. Cont. 2900 PSI (197 Bar)
POWER SOURCE:.. Any Open Center Hydraulic System
B0109
Specifications are subject to change without notice
167 Stock Street, Nesquehoning, PA 18240 Phone: 570-645-3779 Fax: 570-645-4061
Website: www.hydra-tech.com
E-Mail: htpump@hydra-tech.com