HRC-D - Banana ripening cooler – Airbag / side curtain system0 pages
General information & application
Banana ripening coolers Helpman HRC-D have been
designed for application in Airbag & Side Curtain system
banana ripening rooms. The coolers have been optimised
for 14.0 °C air-on and 13 °C air-off temperature at an
evaporating temperature of 7 °C. Helpman HRC-D air
coolers provide for an even temperature distribution
throughout the whole ripening room, guaranteeing that the
products are ripened as evenly as possible.
Evaporating temp. 7 °C (optimised)
Refrigerants all H(C)FC, brine, CO2
Capacities (SC2) 8 up to 38 kW
Banana rooms 6 to 30 pallets
Standard configuration
• Finned coil
- Cu tubing ø 5/8”
- Tube pitch 50 x 50 mm square
- Corrugated Alu-fins.
• 3-5 Fans 400/50/3, Ø 508 and 550 mm.
Cables are led to the outside of the casing.
Enclosed design spray-tight fan motors, protection class
IP55. Motors are equipped with a thermal safety device in
the windings, connected to separate terminals in the box.
• Lighting integrated into the cooler casing.
• Heater elements
• Corrosion resistant casing material:
Aluminium/Sendzimir, white epoxy coated (RAL 9003).
• Hinged driptrays
• Fitted with schräder valve on the suction connection for
testing purposes.
• Sufficient room for fitting the expansion valve inside.
• Suitable for dry expansion or pumped system.
• Stickers indicate fan direction and refrigerant in/out.
• Delivery in mounting position. Coolers are mounted on
wooden beams. Installation can take place with use of a
forklift.
Test
Design pressure 33 bar, higher design pressures on request.
Each heat exchanger is leak tested with dry air and finally
supplied with a nitrogen pre-charge. Brine coolers are tested
at 6 bar.
Please contact our sales organisation for full technical details.
HRC-D
Banana ripening cooler – Airbag / side curtain system
HRC-D
Airbag system ripening room.