Kuhnke Econo 2080 pages
Kuhnke Econo IPC
Control Technology
Kuhnke Econo 208
Compact high-end IPC
®
TM
The fanless IPC with latest Intel Atom Dual Core technology is characterized by
extremely small dimensions and low power requirements. Two SD-Card slots and an
optional hard disk (mSATA-SSD) make this device flexible for data exchange and storage.
Equipped with an USV- power supply, as well as retain memory and a lot of communication
interfaces the IPC can be used as universal industrial control in machines and facilities. The
software can be arranged individually and pre-installed. Following operating systems are
®
®
available right now: Windows Embedded Compact 7, Windows Embedded Standard 7 or
®
Windows XP embedded. Application software: CODESYS V3 PLC with Target- and
®
Webvisu, Softmotion, EtherCAT®- and CANopen - configurators.
Features
®
Maintenance-free with fanless Intel Atom ™ dual-core processor technology
®
®
Networkable through LAN, EtherCAT and CAN (CANopen ) interfaces
Flexibility through internal expansion slot miniPCIe
Robust due to stable, compact stainless steel housing
Secure investment with long-term system availability
Variable by different software packages
Technical Data
Type
Kuhnke Econo 208
Processor
Intel Atom™ N2600 2 x 1.6 GHz
Software
Operating system: WEC7 / WES7; Application: CODESYS V3, TargetVisu, WebVisu, …
RAM / Non-volatile memory
2 GB (DDR3) / Flash memory on SD-Card
Drives
2 x SD-Card Slot (bootable), (mSATA Interface)
Network
2 x Ethernet 1Gbit – RJ45
Interfaces
1 x RS232, 2 x USB 2.0 Host
Field bus interface
1 x CAN, EtherCAT over Ethernet
Extension slot
miniPCIe for extension cards
Monitor port
DisplayPort with UXGA resolution (1600×1200)
Operating system
Windows Embedded Compact 7, Windows Embedded Standard 7
Housing
IP 20, Stainless steel, wall or book size mounting
Overall size (W x H x D)
50 x 190 x 115 mm
Supply voltage
9 ... 36 V DC (Power supply designed for control tasks, 1s UPS)
Power consumption
~ 10 W (@ 24 V DC)
Operating temperature
0 °C...+50 °C
®
®
®
®
We reserve the rights of modification, omission, error with respect to the products. Illustrations similar. All rights reserved by the individual copyright holders. EtherCAT® is a registered trademark and patented technology, licensed
by Beckhoff Automation GmbH, Germany. Microsoft®, Windows® and the Windows® Logo are registered trademarks of Microsoft Corporation in the USA and other countries. At www.plcopen.org you will find more information
about PLCopen Organisation. CiA® and CANopen® are registered community trademarks of CAN in Automation e.V.
17.10.14
Kendrion Kuhnke Automation GmbH, Industrial Control Systems
23714 Malente, Deutschland / Germany, www.kuhnke.kendrion.com