Operation manual M0 pages
Available Mounting Options
High Performance Automatic Grease Lubricator
Single Point Lubrication
Multi Point Lubrication Using Progressive Divider Block
Specifications
Specifications
Description
Grease Pouch
125 / 250cc (replaceable)
Operating Pressure
30~60kgf/㎠ (425~850psi)
Operating Temperature
Product Size
Weight
Available Dispensing Periods
Installation Thread Size
Multi Point
Remote Installation
-15˚C ~ 60˚C (5˚F ~ 140˚F)
-40˚C ~ 60˚C (-40˚F ~ 140˚F) *
* with optional Lithium Battery Pack
125cc: Ø91mm (3.6") × 183mm (7.2")
250cc: Ø91mm (3.6") × 210mm (8.2")
125cc: 860g (1.89 lb)
250cc: 1,050g (2.31 lb)
Half (H), 1, 2, 3, 6 & 12 months
3/8" Male BSPT
Up to 8 points
Up to 6m (20ft) using a 6mm (1/4") O.D.
pre-filled lube line
Technical information is subject to change without notice.
Models
/
PULSARLUBE M 125/250cc Grease Lubricator
Direct Straight/Angle Mount (with or without extension tube) is
always preferable. However, for applications not allowing any
direct mounts or extension mounts, remotely mount the unit
using a 6mm O.D. (1/4") pre-filled lube line.
Remote multi point lubrication is available with the Pulsarlube M using
a divider block. It is recommended to test the back pressure of the bearing,
lube lines, and divider block after assembly using a grease gun connected to
a pressure gauge. Ensure the break-off pressure is below the average operating
pressure of 30kgf/㎠ (425psi).
Before Use
Thank you for purchasing the Pulsarlube M, the electromechanical automatic grease lubricator from Pulsarlube USA, Inc.
To ensure the safe operation and proper installation of the Pulsarlube M unit, we strongly recommend that you read the
following information carefully before use.
If you require further information, please contact your local supplier or manufacturer.
WARNING Keep the maximum distance per lube point at 6m (20ft) or less.
Product Details
Installation parts for Multi Point Lubrication
LCD Display - Function
The dispensing period setting
Pouch
Spring
125
250
OIL
Housing
The # of days remaining until the end
of lube cycle
The unit is in"Automatic Lock Out"
mode
Pouch
Plate
Mounting Bracket Assembly
Extension Tube
Progressive Divider Block Push-in One-touch Empty & Pre-filled Nylon
Fitting
Tubing
Shelf Life and Product Warranty
The shelf life of each Pulsarlube M unit is 1 year from the date of production.
Product warranty is limited to original defects in material and workmanship
and will not cover any collateral damage due to mishandling, abuse and /or any
other inappropriate use of this product. Warranty period is 1 year from the date
of purchase.
Grease
Pouch
Buttons
How to Order
Select the dispensing rate in
ascending order: 1▶2 ▶ 3 ▶ 6 ▶
12 ▶ Half (H)
M125 / PL1
M250 / PL1
LCD
Grease Type
Pulsarlube Model #
(M125: 125cc, M250: 250cc)
Motor
Main Body
Piston
Gear
Set
Worm
Gear
Pulsarlube USA, Inc.
4312 Di Paolo Center, Glenview, IL 60025, USA
TEL: 1-847-795-0591
FAX: 1-847-795-0119
125 / 250
Deactivate "Automatic Lock Out"by
pressing the MODE/LOCK button
until the lock icon ( ) disappears
Doc No. 1042-000 REV. 121100
Connecting Thread
3/8" M BSPT
The test mode is activated
The # of days after dispensing has
completed
The # of days on stand-by mode
due to excessive backpressure
Low battery power
Press the POWER button for 2
seconds to turn unit on or off
Excessive backpressure exists
Select the volume of grease pouch
Run a test cycle by pressing the
TEST button for two seconds
www.pulsarlube.com / info@pulsarlube.com
Selected grease pouch capacity
Reset the unit when the unit
malfunctions and/or after changing
the service pack
Empty grease level
Signal lamp blinks periodically
when battery power is low, excessive
backpressure exists, or if grease
level is empty