عضویت 
ورود اعضا
راهنمای خرید
Mactech c-hog0 pages
Mactech Europe LTD
C-Hog Electric
The C-Hog Electric Powered Pipe and Tube Beveling Tool offers the same
capabilities for end prepping pipe and tube as the pneumatic version only with
the convenience of plugging into standard electric outlets.
The C-Hog Electric O.D. Clamping Pipe and Tube Beveling Tool offers the
convenience of plug in power and is available in 110 or 220 volt.
Mactech C-Hog Electric
The C-Hog uses Clamping Saddles that firmly attach to the Pipe or Tube o.d.
This rigid clamp design keeps chatter and vibration to a minimum and allows
the tool's cutting blade to get under the material; pull a thick chip and end
prep the hardest alloys quickly.
Designed for maximum comfort, efficiency, safety and ease of use, the C-Hog's attached
ratchet feed wrench lets the operator comfortably feed the tool as it preps the end, prep
after prep-after-prep all day long with a minimum of fatigue. The C-hog is well suited for
small bore heavy wall tubes with a high percentage of chrome, stainless steel, and other
hard alloys. It accommodates large boring blades and combinations of blades to bevel, face
and bore.
Standard and custom blades are offered in a wide variety of angles and sizes and are firmly
secured by the EscoLock wedge style blade locking system. No cutting lubricants are
necessary.
