Interchangeable Torque Sensors0 pages

"STS SeriesTorque Sensors for DFS-R-ND Series nn

Specifi cation Sheet SS-FM-3025-0305March 2005 The CHATILLON >
STS Series torque sensors are full-bridge strain gauge sensors complete with 15-pin plug. These sensors are used exclusively with the Chatillon DFS-R-ND Series digital indicator. ThesensorΒs torque values and sensitivity factors are stored in memory within the sensor plug. When connected to a DFS-R-ND indicator, the capacity and calibration points are automatically recognized by the instrument. The instrument then becomes a full-featured torque measurement instrument. The STS Series torque sensor meets ASTM E4 and BS EN ISO 7500 part 1 for a +0.3% accuracy sensor. The sensors are connected to the DFS-R-ND with a retractable cord that extends fully to nearly 9 ft. (3 m). >
Remote Sensors- Torque Measurement Model in-oz N-cm in-lb kg-cm N-m STS-0003 50 x 0.005 35 x 0.005 3 x 0.0005 3.5 x 0.0005 0.35 x 0.0001 STS-0012 192 x 0.02 125 x 0.02 12 x 0.002 12.5 x 0.002 1.25 x 0.0002 STS-0050 800 x 0.1 500 x 0.05 50 x 0.005 50 x 0.005 5 x 0.0005 STS-0100 - 1000 x 0.1 100 x 0.01 100 x 0.01 10 x 0.001 STS-0200 - 2000 x 0.2 200 x 0.02 200 x 0.02 20 x 0.002 Specifi cations Input Resistance: 1100 ohms +100 Output Resistance: 1000 ohms +100 Rated Output: 2.0 mV/V Safe Overload: 150% Full Scale Non-Linearity: +0.1% Full Scale Hysteresis: +0.1% Full Scale Zero Balance: +1.0% Full Scale Operating Temp: 30 >

nn

to 120 >

nn

а

F (-40 >

nn

to 82 >

nn

а

C) DFS-R shown with STS Series torque sensor. >

"