Standard Sensors Serie 70000 pages
Series 7000
Torque Sensor for PTO-shafts
www.ncte.de
Properties
PTO (Power Take-Off) shaft with integrated torque
and angle measurement
Non-contact measurement system, high robustness
Special for PTO shafts 1 ¾’’ und 1 3/8’’
“Plug & Play” solution, no additional electronics
required
Performance
Measurement range from 3000 Nm to 8000 Nm
Accuracy class 0,5 %
Temperature range -40 °C … +105 °C
IP65
Turning speed up to 3600 rpm
Output Signals 0-10 V / 4-20 mA / CAN Bus
1. Short description
The Series 7000 makes the torque- and angle-measurement in machines for agriculture and forestry industry
easier and cheaper. The non-contact measurement principle shows very high robustness against mechanical
and thermal influences and is maintenance-free. There are different adaptions available for the direct use of the
sensors in various applications. It is therefore quite easy and quick to integrate them. The sensor is delivered as
one complete unit with integrated electronics and cable.
The optional read-out unit provides both the torque- and angle-measurement on it‘s display as well as the data
storage on an integrated SD-card automatically. The data can be read through an USB interface.
The complete sensor unit can be operated from 12 V to 24 V (“Cigarette lighter”).
2. Model Series 7000
Model
Series 7000
Shaft
Nominal-Torque
1 3/8 Inch
6
Rotational
Speed
Unit
Bi-directional (+/-)
Bi-directional (+/-)
[rpm]
[Nm]
3000
10000
3600
[Nm]
5000
10000
3600
[Nm]
Number of
teeth on gear
Max. Overload
5000
10000
3600
21
1 3/4 Inch
Flange
6
20
-
Subject to technical changes
Revision f, December 2013
- All data without guarantee except technical modifications -
Page 1
"