Oil Free Bushings0 pages
Please refer to website for current pricing.
nnnnOil Free Bushings
nnnn-Bronze Straight I.D.F7 O.D.m6,1.D.E7 O.D.r6 Type / Bronze Shoulder Type-
nnnnface
nnnnBlue: New Price
nnnn(f)For features, see below.
nnnn■Straight Type |:ff!i=l
nnnnSHBZ(I.D.F7 0.D.m6Type)
nnnnSHBR(I.D.E7 0.D.r6Type)
nnnnScrew Plugs
nnnn1 , 1-2.5 | ||
-r | ||
■a | ||
-0.1 L-0.3 |
■ Features of Bronze Type
nnnn-Suited for high speed and low load applications
nnnnwhen lubricated.
nnnn-Excels in friction, heat and corrosion resistance
nnnnunder lubricated conditions.
nnnn- Lubrication frequency can be reduced.
nnnn- Alterations on Overall Length are available.
nnnnEnsure the bushing remains well lubricated.
nnnnRecommended Mating Shaft
nnnnfS or g6
nnnnAllowable Temperature: -40-150°C
nnnnPart Type | Number d | L | D | Thickness M | * Housing Dia. | * Rotation Stopper Screws (Reference) | |||||
F7 | E7 | m6 | r6 | lefefenc* Dinensian | Tolerance (H 7) | ||||||
SHBZ (I.D. F7 0.D. m6\ I Type SHBR 1 I.D.E7 0.D. r6 \ I Type J | 5 | +0.022 +0.010 | +0.032 +0.020 | 8 10 12 15 | 9 | +0.015 +0.006 | +0.028 +0.019 | 2 | 9 | +0.015 0 | M4x8 |
6 | 8 10 12 15 20 | 10 | 10 | ||||||||
8 | +0.028 +0.013 | +0.040 +0.025 | 8 10 12 15 20 25 | 12 | +0.018 +0.007 | +0.034 +0.023 | 12 | +0.018 0 | |||
10 | 8 10 12 15 20 25 | 14 | 14 | ||||||||
12 | +0.034 +0.016 | +0.050 | 10 12 15 20 25 | 18 | 3 | 18 | |||||
13 | 15 20 | 19 | +0.021 +0.008 | +0.041 +0.028 | 19 | +0.021 0 | |||||
15 | +0.032 | 10 12 15 20 25 | 21 | 21 | |||||||
16 | 10 12 15 20 25 30 40 | 22 | 22 | ||||||||
20 | +0.041 +0.020 | +0.061 +0.040 | 15 20 25 30 40 50 | 28 | 4 | 28 | M5x8 | ||||
25 | 20 25 30 40 50 | 33 | +0.025 +0.009 | +0.050 +0.034 | 33 | +0.025 0 | |||||
30 | 25 30 40 50 60 | 38 | 38 | M6x16 |
* Indicated dimensions of Housing Dia. and Rotation Stopper Screws are recommended dimensions. For working on SHBZ, Rotation Stopper Screws are recommended.
nnnn■ShoulderType I:?! I
nnnnSHFZ
nnnn■ Features of I.D.E7 O.D.r6
nnnn- Less likely to pull-out than I.D.F7 O.D.m6 Type.
nnnn- Inner Diameter after Press-Fit is almost equal
nnnntol.D.F7 0.D.m6Type.
nnnn■Bronze Bushings: Inner Dia.
nnnnvariations after Press-Fitted (Ref. value)
nnnnHousing Diameter Tolerance: H7
nnnnEnsure the bushing remains well lubricated.
nnnn- -d Mating Shaft
nnnnf8 or g6
nnnnE] Material: Special Bronze Castings
nnnnAllowable Temperature: -40-150°C
nnnnI.D. E7 O.D. r6 | I.D. F7 0.D. m6 |
99.82% | 99.94% |
®Data above are obtained by test, not guaranteed.
nnnnPart Number | L | Dr6 | Thickness (N) | H | 0 t-0.1 | * Housing Dia. | Unit Price | |||||||||||
Type | dE7 | Reference Dimension | Tolerance |H 7) | L10 | L12 | L25 | L30 | L40 | ||||||||||
SHFZ | 5 | +0.032 +0.020 | 10 12 | 9 | +0.028 +0.019 | 2 | 14 | 2 | 9 | + 0.015 0 | 5.10 | 5.10 | ||||||
6 | 10 12 15 | 10 | 16 | 10 | 4.40 | 4.40 | 5.80 | |||||||||||
8 | +0.040 +0.025 | 10 12 15 20 | 12 | +0.034 +0.023 | 20 | 12 | + 0.018 0 | 4.10 | 5.10 | 5.10 | 5.40 | |||||||
10 | 10 12 15 20 | 14 | 22 | 14 | 4.10 | 5.40 | 4.30 | 5.40 | ||||||||||
12 | +0.050 | 10 12 15 20 25 30 | 18 | 3 | 25 | 3 | 18 | 5.40 | 5.40 | 5.40 | 5.40 | 6.80 | 7.40 | |||||
13 | 12 15 20 | 19 | +0.041 +0.028 | 26 | 19 | + 0.021 0 | 6.70 | 7.00 | 7.00 | |||||||||
15 | +0.032 | 10 12 15 20 25 | 21 | 28 | 21 | 7.30 | 7.30 | 7.30 | 7.70 | 8.30 | ||||||||
16 | 12 15 20 25 30 | 22 | 29 | 22 | 7.30 | 7.30 | 7.70 | 8.30 | 8.70 | |||||||||
20 | +0.061 +0.040 | 15 20 25 30 40 | 30 | 5 | 40 | 5 | 30 | 8.30 | 8.30 | 8.70 | 8.70 | 9.80 | ||||||
25 | 30 40 50 | 35 | +0.050 +0.034 | 45 | 35 | + 0.025 0 | 10.50 | 11.80 | 14.50 | |||||||||
30 | 30 40 50 | 40 | 50 | 40 | 12.00 | 14.50 | 17.40 |
iusing diameters listed here are recommended dimensions.
nnnn■Volume Discount Rate
nnnnQuantity | 1-29 I 30-49 | 50-79 I 80- |
Discount Rate | Unit Price | 5% | 10% | 15% |
Days to Ship | Standard | To be quoted |
For larger quantity orders
nnnn"Days to Ship" may differ
nnnnSHBZ12
nnnnSHBR16
nnnnSHFZ16
nnnn15
nnnn20
nnnn20
nnnnDays
nnnnID Ship
nnnnSHH/SHEOMllt/SIB SHBZOSection)
nnnn1 Day 3 Days
nnnn|3j | Part Number] - [T] - (LC)
nnnnSHBZ20 - 20 - LC10
nnnnType | d | Unit Price | |||||||||
L15 | L20 | L25 | L30 | L40 | L50 | L60 | |||||
SHBZ | 4.00 | 4.00 | 5.30 | 5.30 | |||||||
6 | 3.60 | 3.60 | 3.60 | 4.00 | 4.80 | ||||||
8 | 3.20 | 3.20 | 3.20 | 3.60 | 4.30 | 5.70 | |||||
10 | 3.40 | 3.40 | 3.40 | 3.60 | 3.60 | 4.50 | |||||
12 | 3.60 | 3.60 | 3.90 | 3.90 | 4.80 | ||||||
13 | 4.90 | 5.30 | |||||||||
15 | 4.80 | 4.80 | 5.30 | 5.30 | 6.30 | ||||||
16 | 5.30 | 5.30 | 5.30 | 5.30 | 5.30 | 6.60 | 8.10 | ||||
20 | 6.60 | 6.60 | 7.20 | 7.60 | 8.80 | 9.80 | |||||
25 | 7.80 | 7.80 | 7.80 | 9.40 | 10.30 | ||||||
30 | 7.80 | 7.80 | 9.40 | 10.30 | 11.40 |
Non-Returnable R88
nnnnLC
nnnnFull Length
nnnnSpecify in 1mm
nnnnIncrement.
nnnn| Order Code"]
nnnnmin<LC<L
nnnnSpec.
nnnnSHBZ
nnnnSHBR
nnnnd5~d20
nnnn2.00
nnnnd25/30
nnnn3.00
nnnnType | d | Unit Price | |||||||||
L8 | L10 | L12 | L15 | L20 | L25 | L30 | L40 | L50 | L60 | ||
SHBR | |||||||||||
6 | |||||||||||
8 | |||||||||||
10 | |||||||||||
12 | |||||||||||
13 | |||||||||||
15 | |||||||||||
16 | |||||||||||
20 | |||||||||||
25 | |||||||||||
30 |
Oil Free Bushings
nnnn-Bronze Standard Flanged Type / Oil Free Bushings with Threaded Housing (Built-in Copper Alloy)-
nnnnIStandard Flanged Type
nnnnRound Flange
nnnnSHTZ
nnnnCompact
nnnnSHTNZ
nnnn(*)Ensure the bushing remains well lubricated.
nnnn®Recommended Mating Shaftf8 or g6 fj Material: Special Bronze Castings
nnnnAllowable Temperature: -40~150°C
nnnn0 Accessories: Hexagon Socket Low Head
nnnnCap Screws 2-4 pes.
nnnnPart Number | L | Dh7 | H | T | t | dt | d2 | PCD. | F | A | Accessories HexagoflSoctet Low ffeaj CapS™ | |||
Type | dF7 | |||||||||||||
SHTZ SHTNZ | 6 | +0.022 +0.010 | 15 | 10 | 0 -0.015 | 25 | 4 | 2.2 | 3.5 | 6 | 17 | 17 | M3-10X2 | |
8 | +0.028 +0.013 | 20 25 | 12 | 0 -0.018 | 27 | 19 | 19 | |||||||
10 | 25 30 | 14 | 29 | 21 | 21 | |||||||||
12 | +0.034 +0.016 | 25 30 | 18 | 36 | 5 | 3 | 4.5 | 7.5 | 26 | 26 | M4-12X2 | |||
16 | 25 30 35 40 | 22 | 0 -0.021 | 40 | 30 | 18 | 24 | M4-12X4 | ||||||
20 | +0.041 +0.020 | 30 35 40 50 | 28 | 49 | 6 | 3.7 | 5.5 | 9 | 38 | 22 | 31 | M5-16X4 | ||
25 | 30 35 40 50 60 | 33 | 0 -0.025 | 54 | 43 | 25 | 35 | |||||||
30 | 35 40 50 60 70 | 38 | 63 | 8 | 4.2 | 6.6 | 11 | 50 | 30 | 40 | M6-20X4 |
1
nnnn■Volume Discount Rate
nnnnQuantity | 1-19 I 20-29 | 30-39 1 40- |
Discount Rate | StandairJUnitPtfce | 5% | 10% | 15% |
Shipping Date | Standard | To be quoted |
For larger quantity orders
nnnnI ^ | Alteration!1—1 SHTZ20 - 30 - LC20
nnnnlEI 1 6 I Days
nnnn1—' •_t
nnnnType
nnnnSHTZ
nnnnL20 L25 L30 L35 L40 L50 L60 L70
nnnnType
nnnnSHTNZ
nnnnL20 L25 L30 L35 L40 L50 L60 L70
nnnnSpec.
nnnn_d_
nnnnFull Length _6
nnnnOrder Code | 10
nnnnmin<LC<L
nnnnd6~d20
nnnn2.00
nnnnd25 / 30
nnnn3.00
nnnn: Order | Part Number
nnnnI Eramplg SHTZ16
nnnn25
nnnn40
nnnnSHTNZO Section]
nnnnSMP 1Day
nnnnSHTZ/SHTNZll I Section]
nnnn3 Days
nnnnI Features Machining and assembly process to the assembling plate can be reduced by changing from the conventional tapping hole x 4 to H7 hole x 1
nnnnRemoving counterbored holes from the flange made the flange diameter up to 17mm smaller, resulting in space savings.
nnnn■With Threaded Housing (jj^j-j)
nnnnOil Free Bushings
nnnno
nnnn<^0
nnnnCase | Type | Housing | Tightening Nut | Bushings | ||
EjMaterial | @ Surface Treatment | EjMaterial | @ Surface Treatment | EjMaterial | ||
Single | 1018 Carbon Steel | Electroless Nickel Plating | 1045 Carbon Steel | Electroless Nickel Plating | High Tensile Brass Alloy Solid Lubricant Embedded | |
Double | MPNTW |
Retaining Ring I_
nnnnOil Free Copper Alby Bushing
nnnnSpecial Nut
nnnnRetaining Ring
nnnnOil Free Copper Alloy Bushings (2 pes.)
nnnn^Recommended Mating Shafts f8 or
nnnnPart Number | D | L | 1.1 | T | H | B | M | m | Unit Price | ||||
Type | d | Single | Double | MPNT | |||||||||
Single MPNT Double MPNTW | 6 | 14 | 22 | 37 | 5 | 5 | 20 | 17 | 14x1.5 | 8 | 19.6 | 21.00 | 30.40 |
8 | 18 | 27 | 47 | 5 | 5 | 25 | 21 | 18x1.5 | 11 | 24.3 | 25.20 | 34.00 | |
10 | 20 | 32 | 57 | 5 | 6 | 30 | 24 | 20x1.5 | 12 | 27.7 | 29.00 | 39.30 | |
12 | 22 | 32 | 57 | 10 | 6 | 32 | 27 | 22x1.5 | 13 | 31.2 | 30.20 | 40.90 | |
13 | 24 | 32 | 57 | 10 | 6 | 35 | 30 | 24x1.5 | 14 | 34.6 | 32.40 | 43.30 | |
16 | 27 | 37 | 67 | 10 | 6 | 40 | 32 | 27x1.5 | 16 | 37.0 | 35.40 | 48.10 | |
20 | 33 | 42 | 77 | 10 | 8 | 45 | 38 | 33x1.5 | 20 | 43.9 | 39.90 | 57.80 | |
25 | 40 | 58 | 108 | 10 | 8 | 55 | 46 | 40x1.5 | 25 | 53.1 | 49.80 | 79.70 | |
30 | 48 | 68 | 128 | 10 | 10 | 65 | 55 | 48x1.5 | 29 | 63.5 | 65.40 | 107.60 |
i Order
nnnnPart Number
nnnn[/EE M| Example MPNT6
nnnnMPNTW16
nnnnDays
nnnnlo Ship
nnnnDays
nnnnSiT R 87
nnnn<Dimensions of Special Nuts>
nnnnM | m | Special nut | JIST | Iipe3 | |
B | (s) | B | (s) | ||
14 | 8 | 17 | 19.6 | 22 | 25.4 |
18 | 11 | 21 | 24.3 | 27 | 31.2 |
20 | 12 | 24 | 27.7 | 30 | 34.6 |
22 | 13 | 27 | 31.2 | 32 | 37.0 |
24 | 14 | 30 | 34.6 | 36 | 41.6 |
27 | 16 | 32 | 37.0 | 41 | 47.3 |
33 | 20 | 38 | 43.9 | 50 | 57.7 |
40 | 25 | 46 | 53.1 | ||
48 | 29 | 55 | 63.5 | 75 | 86.5 |
■Volume Discount Rate
nnnnPrice
nnnnQuantity | 1-4 | 5-9 | 10-19 | 20- |
Discount Rate | Stardard Unit Prce | 5% | 10% | 15% |
Days to Ship | Standard | To be quoted |
For larger quantity orders "Days to Ship" nay differ from published catalog term.ErR87
"