DC and Brushless Servo Motor Driver 500 Series0 pages

Description Power Range Peak Current 12 A (8.5 A >
RMS ) Continuous Current 6 A (4.2 A This 500 series digital servo drive is designed to drive brushed and brushless servomotors from a compact form factor. This fully digital drive operates in torque, velocity, or position mode and employs Space Vector Modulation (SVM), which results in higher bus voltage utilization and reduced heat dissipation compared to traditional PWM. The command source can be generated internally for testing or can be supplied externally. In addition to motor control, this drive features dedicated and programmable digital and analog inputs and outputs to enhance interfacing with external controllers and devices. The drive features an RS-232 interface for drive configuration and setup.All drive and motor parameters are stored in non-volatile memory. >
RMS ) Supply Voltage 20 - 80 VDC Features Four Quadrant Regenerative Operation PIDF Velocity Loop Space Vector Modulation (SVM) Technology PID + FF Position Loop Fully Digital State-of-the-art Design Compact size, high power density Programmable Gain Settings 12-bit Analog to Digital Hardware Fully Configurable Current, Voltage, Velocity and Position Limits MODES OF OPERATION FEEDBACK SUPPORTED Current Hall Effect Sensor Position Incremental Encoder Velocity 10 V Analog COMMAND SOURCE Auxiliary Incremental Encoder ѱ10 V Analog +5V Step and Direction Moticont Phone ((888) 785-1804 6901 Woodley Avenue Van Nuys, California 91406 U.S.A. www.moticont.com +1 (818) 785-1800 FAX +1 (818) 785-5713 E-mail moticont@moticont.com >