Flo-Tel+ Sensor0 pages

Oseco’s Flo-Tel+ is a non-invasive
burst detection sensor

FLO- TEL+ F E AT U RE S
• Sensor is not in contact with the process;
therefore, there are no potential leak paths
• Non-invasive design; therefore, unaffected
by downstream pressure fluctuations or
corrosion
• Test-Tel™ available for in place testing of
Flo-Tel+ and Opti-Gard
• IP 65-rated

Flo-Tel+
Flo-TelTM+ is a non-invasive detection system designed for use
with the Opti-Gard rupture disc and holder. The Flo-Tel+ provides an excellent solution for identifying when a rupture disc
bursts. After rupturing, the disc is the only element to be replaced, eliminating expensive rewiring costs.
Operating on simple reed-switch and magnet technology, FloTel+ is designed to offer a practical solution for rupture disc
detection needs. The sensor is fitted into the holder with a
magnet on the rupture disc, when the rupture disc bursts, the
rupture disc with its magnet arcs away from the sensor, giving
an open circuit signal.

ELECTRICAL DATA
• Ui: 50v
• Li: 250mA
• Max Voltage: 24V
• Max Current: 0.1A
• Max Power: 1W
• Max Process Temp: 482° F (250° C)
• Min Process Temp: -67° F (-55° C)
• Supplied with 2 meter cable

Oseco Inc
1701 W. Tacoma
Broken Arrow Oklahoma 74012 USA
Tel: (918) 258-5626
Fax: (918) 251-2809

0910

Visit the products section of
oseco.com to ensure you have
the most recent information.

www.ose co . co m
Contact Oseco at 800-395-3475
or email us at info@oseco.com.

Flo-Tel+ • SENSORS AND DETECTION

Flo-Tel+