G Series Product Brochure0 pages

6 to 90 kVA
45 to 5,000 Hz
Efficiency (EFF)
Varies with type of load attached to the power source as follows:
EFF = 70–90% with predominantly power supply type loads.
EFF = 70% at maximum (125 V) output.
EFF = 65% at nominal (120 V) output.
EFF = 60% at low line (105 V) output.
Ambient Temperature
0 to 55°C Operating.
–40° to 85°C Nonoperating.
Humidity
0–95% relative humidity, noncondensating.
Cooling
Self contained fans provide forced air cooling. All air inlets are
filtered. Filters are replaceable and reusable.
Heat Dissipation
If system location is to be air conditioned, allow 800 BTU/hour
per kVA for a typical electronic load (higher for mixed or linear
loads).
NOTE: One ton of cooling = 12,000 BTU/hour.
Ventilation required to maintain less than a 10°C rise in the
ambient temperature for a typical electronic load:
390-G – approximately 600 CFM.
Input/Output Service Connections
Input and output connections are made via a heavy duty
terminal block mounted inside NEMA-approved junction boxes
that are located on the lower rear panel of the mainframe.
Allow an additional 3.25½ to overall depth for junction box
clearance, or 5.25½ when “T” output option is specified.
Solid State AC Power Conversion
• Programmable AC test power, 45 to 5,000 Hz.
• Power line susceptibility tests: spike, sag, surge.
• Flexible, expandable lab power.
• Precision frequency conversion.
• High reliability UPS.
For Application Engineering Assistance
Contact the factory directly Consult your local PPS Representative
© 2008 Pacific Power Source, Inc. Subject to change without notice. #8GSCAT0908
17692 Fitch, Irvine, CA 92614 USA
Call direct: +1 949-251-1800 • Fax: +1 949-756-0756
US: 800-854-2433
E-mail: sales@pacificpower.com • www.pacificpower.com
G Series
AC Power Systems
www.pacificpower.com
T h e P owe r o f E x p e r t i s e
As a privately held, leading manufacturer of high-quality AC Power Conversion
Equipment, Pacific Power Source, Inc. offers standard catalog products that
range in power from 500 VA to >625 kVA. Low-power products include line
conditioners, frequency converters and Programmable AC Power Sources.
High-power systems include programmable power test equipment, power line
conditioners, frequency converters and uninterruptible AC Power Sources.
The Leader in Power Technology
Founded in 1971, the Irvine, California, company was an early pioneer
in the development of linear solid-state power conversion for use in
high-reliability applications. The company now manufactures both
advanced linear and broadband switching types of AC Power Sources.
Mechanical Specifications
Dimensions 390-G
A. Height w/caster base 78½
B. Height w/forklift base 78.5½
C. Width 23½
D. Depth 34.5½
Weight 1,000 Lbs.
Air Flow 2,000 CFM
Each G Series mainframe is provided on a caster base
with leveling feet for ease of installation.
Forklift or shock mount base is optionally available.
Consult the factory for details.
Environmental Characteristics