quickcoating is economical0 pages

EDRA
POWDERCOATING
EQUIPMENTS
IN DER SCHWEIZ 18,
72770 REUTLINGEN
GERMANY
GOOGLE: EDRA
SKYPE: EDRANET
PHONE: 0049-7072-600590
INFO@QUICKCOATING.COM
WWW.QUICKCOATING.COM
LEAFLET
TRADEMARK
OF EDRA GERMANY
QCE
070
quickcoating is economical
This technology is a really economical solution!
Energy: Requires only a standard wall socket (230 VAC, 20W/h).
Powder: There is absolutely no powder loss.
Powder: Works with a small amount of powder (fill-up quantities between 1.0 and 2.5 kg).
Production: Fast powder coating in about 10-20 seconds, the cycle time is approx. 1-2 minutes.
Space: Needs only a small footprint of approximately 1 m².
Noise: It works almost noiseless.
Health: The process chamber is dustproof. Air and workplace always remain clean.
Downtime: Fast powder swapping in only 5 minutes.
Efficiency: Suitable for permanent operation as well as for three shift systems.
Maintenance: It is maintenance-free! There are virtually no wear and tear parts.
Manpower: After the adjustment the machine can be operated by an assistant.
Performance: Machine uptime of 97-99%, hardly any downtime for maintenance or cleaning.
Amortisation: Low CAPEX and therefore rapid amortization.
ENERGY
PERFORMANCE
POWDER
Electricity & Compressed air
Machine uptime
Use & Waste
Use: 100%
97-99%
QC
QC
Use
50-70%
Other > 2000 W
60-70%
QC ≈ 20 W
Other
Waste
30-50%
Other
Some economical aspects of the quickcoating system in comparison to powder coating with an ordinary spray gun.
(QC = quickcoating)