DS & WT SERIES PRESSURE TRANSDUCERS0 pages

DS & WT SERIES PRESSURE TRANSDUCERS
♦

Wide pressure ranges available

♦

Adjustable zero and span

♦

Available with voltage or current outputs

♦

Rugged anodized aluminum housing

♦

Stainless steel sensor option

♦

NEMA4 option

DESCRIPTION

DIMENSIONS

DS series pressure transducers accurately measure pressure
of gases or fluids. The output is an electrical signal based on
the measurement.

DS SERIES

TO 2nd LOOP
FEEDBACK
18 [457]

Conditioning of the electrical signal from the strain gauge
sensor gives either 0-10 VDC or 4-20 mA output depending
on the model ordered (consult factory for other available
outputs). The electrical output is a linear ratio of the pressure sensed. DS series transducers are enclosed in a rugged
aluminum housing. A strain relief protects the wiring from
damage caused by excessive pulling force.

1.06 [27]

1.84 [47]
3/4 HEX
1/4 — 18 NPT
1.75 [44]

The standard version (DS) measures pressure using a
piezoresistive semiconductor sensor chip.

DST SERIES
1.50 [38.10]

(Old Style)

The stainless steel version (DST) utilizes the same silicon
etched device mounted on a stainless steel diaphragm. On
these units, no elastomers or o-rings contact the pressurized
media. All media wetted parts are ANSI type 316L stainless
steel.

SS SENSING UNIT
1/8” NPT STD

1.75 [44.45]

The NEMA4 version (WT series) is electrically identical to
the DS series. The WT series is housed in a slightly larger
canister that is sealed against fluid spray from any direction.

3.60 [91.44]

DST SERIES

4.04 [102.62]

(New Style)

WT SERIES
2.8 (71.12)
2.2 (55.88)

STAINLESS 1/4” NPT
3.87 [98.2]
3.14 [79.56]
.68 [17.37]

2.2 (55.88)

ELECTRICAL CONNECTOR— USER SPECIFIED

STAINLESS 1/8” NPT

1
BRDS-WT